AND Weighing FX-3000i Precision Balance,3200 x 0.01 g
A&D’s FX-i Series entry level precision balance is a full-featured 0.01g to 1mg resolution balance at a very affordable price. The patented Compact Super Hybrid Sensor is at the heart of this unit and provides fast, one-second weighing response time more ...
A&D’s FX-i Series entry level precision balance is a full-featured 0.01g to 1mg resolution balance at a very affordable price. The patented Compact Super Hybrid Sensor is at the heart of this unit and provides fast, one-second weighing response time.
The FX-i also contains a specially designed internal shock absorber that offers protection from the adverse effects of vertical or transverse overloading. Legal-for-trade models (NTEP and Measurement Canada) are also available.
Statistical Calculation Function
The statistical values Sum, Maximum, Minimum,Range, Standard Deviation, Number of Data,and Coeffi cient of Variation can be displayedor output.
Comparator Function
Easy to compare weighing results by setting HI limit and LO limit to display HI,OK,LO indicator.
ACAI – Automatic Counting Accuracy Improvement
This counting function recalculates the average weight each time a sample is added to eliminate errors caused by variations in unit weight.
Percent Mode Function
A sample can be registered as 100% and the weight of another sample can be compared as a percentage
Animal Weighing Function
The HOLD function enables freezing of weighing data for animal weighing applications and an ANIMAL indicator appears on the display.
Underhook
The underhook allows for measurement of magnetic materials and density measurements in air and water
Standard RS-232C Interface
Incorporates bi-directional communication with a PC, printer or other peripheral devices.
GLP/GMP/GCP/ISO Compliant
In accordance with GLP and LIMS regulations the balance ID number and calibration data can be printed out using A&D’s AD-8121B or a PC.
Auto Power OFF Function
The display switches OFF automatically when the balance is inactive for 10 minutes as a power-saving tool.
Built-in Rechargeable Battery (FXi-09)
An optional Ni-MH rechargeable battery pack can be fitted into the FX-i series for use without AC power and for mobile applications (10 hours charging time for 8 hours operation).
g, pcs, %, oz, lb, suit weighing environment conditions. fi tted into the FX-i series for use without AC power and
lb-oz, ozt, ct, mom, dwt, GN, tl, tol, mes and MLT
Counting Mode
Min. Unit Mass 0.001g
Min. Unit Mass 0.01g
# of Samples 5, 10, 25, 50 or 100 pieces
Percent Mode
Min. 100% Ref. Mass 0.1g
Min. 100% Ref. Mass 1.0g
Min. 100% Display 0.01%, 0.1%, 1% (depends on the reference mass stored)
Repeatability (Std. Deviation
0.001g
0.01g
Linearity
±0.002g
±0.02g
Stabilization Time (typically set at FAST)
Approx. 1 second
Sensitivity Drift
±2ppm / °C (10°C to 30°C)
Operating Temp
5°C to 40°C (41°F to 104°F), 85% RH or less (No condensation)
Display Type
Vacuum Fluorescent Display (VFD)
Display Refresh Rate
5 times / second, 10 times / second or 20 times / second
Std. Serial Interface
RS-232C Interface
Weighing Pan
130mm
150mm
External Calibration
100g 50g
200g 100g
300g 200g 100g
500g 400g 300g 200g 100g 50g
1000g 500g
2000g 1000g
3000g 2000g 1000g
5000g 4000g 3000g 2000g 1000g 500g
AC Adaptor
Confirm that the adaptor type is correct for the local voltage and power receptacle
AND Weighing KO:WW9-25: RS-232C Cable, 25 pin male to 9 pin female for AD-1192 more info Price: $46.00 In Stock
AND Weighing ,KO:WW9-25:, RS-232C Cable,, 25 pin male to 9 pin female RS-232C Cable, 25 pin male to 9 pin female (for BM, EJ, EKi/EWi, FCi/FCSi, FXi(WP)/ FZi(WP), GH, JM) RS-232C Cable, 25 pin male to 9 pin female (for BM, EJ, EKi/EWi, FCi/FCSi, FXi(WP)/ FZi(WP), GH, JM)
AND Weighing AD-1192· Compact Palm-sized Dot-impact Printer more info Price: $399.00 In Stock
The AD-1192 is a compact, palm-sized dot-impact printer that provides users with essential functions.
Multiple Applications - Use the AD-1192 with A&D balances & scales or in data-logging applications.
Convenient - The AD-1192 is ultra compact, lightweight, low cost and operates with low power consumption. It features a paper near-end detection function.
Connectivity - RS-232C serial interface
AND Weighing FXi-09 Built-in rechargeable battery for FXi--Series more info Price: $279.00 In Stock
AND Weighing FXi-09 Built-in rechargeable battery for FXi--Series
FXi-02, FXi-08 and FXi-09 cannot be used at the same time.
(Not IP65 compliant when used with FX-iWP and FZ-iWP)
AND Weighing FXi-08 Ethernet interface with WinCT-Plus software for FXi--Series more info Price: $429.00 In Stock
AND Weighing FXi-08 Ethernet interface with WinCT-Plus software for FXi--Series
FXi-02, FXi-08 and FXi-09 cannot be used at the same time.
(Not IP65 compliant when used with FX-iWP and FZ-iWP)
AND Weighing FXi-02 USB interface with cable FXi--Series more info Price: $79.00 In Stock
AND Weighing FXi-02 Quick USB interface with cable FXi--Series
FXi-02, FXi-08 and FXi-09 cannot be used at the same time.
(Not IP65 compliant when used with FX-iWP and FZ-iWP)
AND AD-1683 Static Eliminator more info Price: $1,040.25 In Stock
The AD-1683 generates bipolar ions continuously by DC corona discharge separately from positive and negative discharge electrodes and directs the ionized air onto the charged body to eliminate static electricity. The generated ionsare well-balanced in polarity and can eliminate static electricity regardless of the polarity of the charged body
Static Electricity
Generally, insulators such as plastics are prone to be charged with static electricity when the ambient relative humidity is below 45% RH. This may affect weighing and cause a measurement error of several milligrams. The AD-1683 can eliminate static electricity very effectively
*Note: Please confirm that the AC adapter type is correct for your local voltage and receptacle type. To prevent electrical shock, insert the POWER cable into a grouding-type outlet and earth ground the grounding cable
How to install AD-1683:
Choose the installation site so that the AD-1683 can be placed beside the electronic balance and a space wide enough to place sample (10cm to 30cm from the front of the AD-1683) can be secured. Place the sample in front of the AD-1683 inside the specified area and perform static elimination. Then, weighthe sample using the electronic balance
External Dimensions
Static Eliminating Method
DC corona discharge (Bipolar)
Elimination Range
Distance:Approz. 10 cm to 30 cm from the electode. Area: 30x30 cm from the electode. (See Figure 2.)
Elimination Performance
When Charged 5kV:
Distance
10cm
20cm
30cm
50cm
Elimination Time
1 sec
4 sec
15 sec
70 sec
Ambient Temperature and Humidity Ozone Concentration
0°C to 40°C, 80% RH or less
Positive discharge pin: 0.07PPM
Negative discharge pin: 0.25PPM
(Measured at a distance of 1cm from each discharge pin.)
Power Supply
AC adapter. Please confirm that the AC adapter type is correct for your local voltage and receptacle type
AND AD-8922A Remote Controller more info Price: $525.00 In Stock
Remote Controller for AND Weighing balances
Displays weighing data Remotely controls a weighing instrument with key operations (no access to the internal settings) Outputs weighing data to another external device such as a PC or printer via the RS-232C connection Optional BCD, comparator, and analog outputs available Can be panel-mounted
AND AD-8920A Universal Remote Display more info Price: $250.00 In Stock
Universal Remote Display for AND Weighing balances
Connects to A&D’s balances and scales using either RS-232C or current loop
Includes an AC adapter and a communication cable that matches your instrument
Recognizes the balance/scale baud setting automatically
Large and bright VFD display
AND Weighing AD-8127 Compact Multi-Function Printer more info Price: $695.00 In Stock Features
Easy setting and operation with a numeric keypad and
LCD display
Built-in calendar and clock for printing date and time
at any time
Sends re-zero and weighing data request commands to
the balance/scale
Clear and visible dot matrix printing, which also enables long-term preservation of the
printed records
Compact and lightweight for portability and installation anywhere
Interval printing mode for printing weighing data at set intervals
Chart printing mode for printing time-series variations of weighing data
Dump printing mode to receive and print GLP/GMP/GCP/ISO compliant output from
the balance/scale
Performs and prints the results of statistical calculation including standard deviation
Prints an ID number set for the printer at any time
Two types of RS-232C cables (D-Sub 25P and D-Sub 9P) provided as standard to
connect to balances/scales with different interfaces*
Receives a print, paper feed, print statistical calculation results, print total, re-zero, or
weighing data request command from the optional foot switch (AX-SW128)
Character specifications
7 × 9 dots, 1.6 (W) × 3.2 (H) mm
Printing speed
Approx. 1.6 lines/second
Paper feeding speed
Approx. 4 lines/second
Number of characters printed
24 characters/line
Printer paper width
57.5 mm
Operating environment
0 to 40 °C/32 to 104 °F, 35 to 85%RH (no condensation)
Storage environment
-20 to 60 °C/-4 to 140 °F, 10 to 90%RH (no condensation)
Interface
RS-232C (D-Sub 9P, male) / Current loop (DIN)
Power supply
AC adapter
Size / weight
174 (W) × 141 (D) × 87 (H) mm / approx. 500 g
Standard accessories
Ink ribbon (1 pc), plain printer paper (1 roll), AC adapter, AC adapter label, instruction manual, two RS-232C cables (D-Sub 25P and D-Sub 9P)*