|
Mark-10 F755S-EM Short Motorized Test Stand with Load Cell Mount EasyMESUR 750 lbF |
|
Series F test frames with EasyMESUR® are engineered to perform a wide range of tension and compression tests, including break testing, cycling, limit testing to a load or distance, load holding, average force testing, and more more ... |
Test Equipment >
Force Test Stands >
Motorized Test Stands
|
|
|
|
Features
Series F test frames with EasyMESUR® are engineered to perform a wide range of tension and compression tests, including break testing, cycling, limit testing to a load or distance, load holding, average force testing, and more.
Set up and run tests, export results, and create a report via the integrated, easy-to-use touchscreen interface – no PC or force gauge required. For unique needs, run the tester from a PC with your own custom application utilizing EasyMESUR®’s serial command library.
Sample setup and fine positioning are a breeze with available FollowMe® force-based positioning - using your hand as your guide, push and pull on the force gauge or load cell to move the crosshead at a variable rate of speed.
Engineered around a modular function platform, the EasyMESUR® run screen can be arranged with large, simple controls – or configured for more advanced applications with a selection of optional functions, including distance measurement, graphing, cycling, and more. Purchase functions and packages at time of order or enable them in the field via activation codes. All testers are shipped in a 160-hour evaluation mode, in which all functions are available.
Generous travel, clearance, and depth dimensions accommodate samples of various shapes and properties. Modular mechanical design accommodates single- and double-column extensions for oversized specimens.
Select from vertical or horizontal orientations, along with a broad range of force sensor capacities and an expansive array of grips and fixtures.
Features
Rigid and precise by design
Exceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.006 in / 0.15 mm under any load, at any position.
Stepper motors and controllers drive a ballscrew and linear guideway for smooth, quiet operation, with virtually no speed variation under load.
Conveniently modular
Frame bases can be removed to accommodate column extensions and alternative mounting configurations. Most electronics are housed in a self-contained enclosure, easily accessed and replaced if needed. Integrated T-slots along the column accommodate add-ons.
Limit switches
Solid-state upper and lower limit switches may be used as test limits or as test exceptions. Dual-graduated rulers aid in switch placement.
Seamless force sensor interface
Series FS05 smart force sensors mount directly to the crosshead of models F105, F305, F505, and F505H, without any connection cables. Ranges available from 0.12 to 500 lbF [0.5 N to 2.5 kN]. Accurate to ±0.1% of full scale.
Series FS06 S-beam type force sensors mount to models F105, F305, F505, and F505H, recommended when using heavy and bulky grips. Ranges available from 50 to 500 lbF [250 N to 2.5 kN].
Easy-to-service electronics
Most electronics are housed in an integrated module, easily replaced without special tools or processes.
EasyMESUR®
The EasyMESUR® integrated control panel centralizes test setup, test frame control, and data collection into one convenient place. Use the 7” touchscreen to create and run a wide range of tests, including:
- Test to a load
- Test to a sample break
- Test to a distance
- Load holding
- Cycle testing
- Average force testing
View data in graphical format or results tables. Save or export data as needed, or generate a report.
Whats your point of view? Run a test via the Standard, Graph, or Results views, and switch views as needed. Pass / Fail indicator easily identifies problematic samples.
- Standard View - View large-format load and distance values, with pass/fail status.
- Graph View - View a graph of load vs. distance or time, with pass/fail status
- Results View - View results for each run, with corresponding statistics for the results.
Test setup is easy as 1-2-3
Basic tests
Load Limit |
Distance Limit |
Break Limit |
Load Hold |
Cycle |
Averaging |
Basic Test Settings
- Test direction
- Speed
- Test-specific parameters
- Data save preferences
|
Results Settings
- Select results
- Enable and configure pass/fail limits
- Set data collection rate
- Set auto-return to home
|
Graph Settings
- Single-point vs. continuous graphing
- Set load vs. time or vs. distance
- Graphing start threshold
|
Robust data acquisition and management
Blazingly fast Force sensor sampling rate of 5,000 Hz yields accurate peak measurements even in quick-duration events. EasyMESUR® collects load and travel data at up to 100 Hz, and allows up to 100,000 data points per run.
Customizable reporting
Print or create a PDF report, including results, statistics, graph, system and user information, and comments.
Create report templates to save with future reports.
Save or export data
Save individual runs and results to a USB drive or internal storage within the control panel. Results sets and data from individual runs may also be exported as .csv files.
Intelligent manual control
Manually control the test frame to obtain quick load and distance results, or manually position the crosshead prior to a test. Select from several actuation methods, including momentary (button-hold), maintained (button release) motion, jog mode with three distance presets, and FollowMe® force-based positioning.
Push and pull on the force sensor to move the crosshead. Apply greater load to achieve faster motion. FollowMe® is responsive enough for quick positioning as well as fine adjustments.
Calibrate force sensors on the test frame or off-site
Calibrate sensors in one of two ways:
Test frame EasyMESUR® provides an integrated utility, with an intuitive step-by-step wizard. Manual controls allow the technician to use the test frame to apply tension and compression forces. |
Off-site Conveniently remove the force sensors for off-site calibration with a Mark-10 Model M7I or M5I indicator (requires optional AC1083 adapter). |
Secure user access Control user access to sensitive areas, such as test editing and calibration via password.
Optional Functions
Any of the below functions may be purchased at time of order or may be enabled in the field at a later date through a code activation process.
A complete options package (EMP-COMP-1) is also available, including all of the below features at a discounted price.
The test frames are shipped in Evaluation Mode, during which time all available functions are temporarily enabled for 160 hours of operation.
Function |
Part No. |
Description |
Co-requirements |
Distance Measurement |
EMF001-1 |
Measure distance, with the ability to zero the reading. |
- |
Distance Limits |
EMF002-1 |
Stop at user-defined upper and lower distance limits. |
- Distance Measurement (EMF001-1) |
Preload |
EMF003-1 |
Zero the travel position automatically at a user-defined preload value. |
- Distance Measurement (EMF001-1) |
High Speed Extension |
EMF004-1 |
Extend the high end of the speed range, dependent upon test frame model. |
- |
Low Speed Extension |
EMF005-1 |
Extend the low end of the speed range, dependent upon test frame model. |
- |
Cycling |
EMF006-1 |
Set up to 100,000 cycles, with user-defined upper and lower dwell times. Cycle between any combination of limit switches, travel limits, breaks, and load limits. |
- If cycling to distance limits, add Distance Measurement (EMF001-1) and Distance Limits (EMF002-1)
- If cycling to a break point, add Break Detection (EMF007-1
) |
Break Detection |
EMF007-1 |
Stop when a user-defined drop in force occurs. |
- |
Load Holding |
EMF008-1 |
Stop at, and maintain, a user-defined load for a specified period of time. |
- |
FollowMe® |
EMF009-1 |
Push and pull on the sensor’s loading shaft to jog the crosshead up and down, ideal for manual positioning prior to a test. Speed increases with applied force. |
- |
Graphing & Reporting |
EMF010-1 |
Graph load vs. time or distance, view statistics, and generate a report, including graph, results, run data, and other information. |
If graphing load vs. distance, add Distance Measurement (EMF001-1) |
PC Control |
EMF011-1 |
Control the test frame with your own application using a supplied library of motion control and data collection serial commands. While PC control is active, the control panel becomes a pendant, limited to basic, manual controls. |
AC1107 cable, test frame to PC |
Packages
Package |
Part No. |
Includes |
Distance Measurement |
EMP001-1 |
- Distance Measurement (EMF001-1)
- Distance Limits (EMF002-1)
- Preload (EMF003-1)
|
Speed Extension |
EMP002-1 |
- High Speed Extension (EMF004-1)
- Low Speed Extension (EMF005-1)
|
Advanced Functionality |
EMP003-1 |
- Cycling (EMF006-1)
- Break Detection (EMF007-1)
- Load Holding (EMF008-1)
- FollowMe® (EMF009-1)
|
Complete Options |
EMP-COMP-1 |
All functions |
|
|
Other Mark 10 Series-F-EM EasyMESUR Test Frames
|
Specifications
Model |
F755-EM |
F755S-EM |
F1505-EM |
F1505S-EM |
Load capacity |
750 lbF [3.4 kN] 346 kg |
750 lbF [3.4 kN] 346 kg |
1,500 lbF [6.7 kN] 683 kg |
1,500 lbF [6.7 kN] 683 kg |
Maximum travel |
32.0 in [813 mm] |
14.2 in [360 mm] |
32.0 in [813 mm] |
14.2 in [360 mm] |
Standard speed range |
0.5 - 24 in/min [10 - 600 mm/min] |
Optional speed range |
0.001 - 60 in/min [0.02 - 1,525 mm/min] |
0.001 - 70 in/min [0.02 - 1,800 mm/min] |
Load accuracy (% of full scale) |
Test frame: ±0.1% Force sensor: Series FS05: ±0.1% | Series FS06: ±0.15% | Series R07: ±0.15% |
Load sampling rate |
5,000 Hz |
Data acquisition rate |
100 Hz |
Speed accuracy |
±0.2% of setting, virtually no variation with load |
Position accuracy |
±0.006 in [0.15 mm], at any load or position |
Distance resolution |
0.001 in [0.02 mm] |
Limit switch repeatability |
±0.001 in [0.03 mm] |
Power |
Universal input 100-240 VAC, 50/60 Hz, 120W |
Fuse type |
1.2 A, 250V, 3AG, SLO BLO |
Weight |
184 lb - [83 kg] |
149 lb - [68 kg] |
197 lb - [89 kg] |
157 lb - [71 kg] |
Shipping weight |
235 lb - [107 kg] |
195 lb - [88 kg] |
247 lb - [112 kg] |
205 lb - [93 kg] |
Environmental conditions: |
- Indoor use only
- Up to 6,500 ft [2,000 m] above sea level
- Temperature range: 40 - 95°F [5 - 35°C]
- Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing
- Mains supply voltage fluctuations up to ±10 % of the nominal voltage
- Transient overvoltages up to the levels of Overvoltage Category II
- Use in environments up to Pollution Degree 2
|
Conformance |
CE, UKCA |
Warranty |
3 years [see individual statement for further details] |
Country of Origin |
USA |
ECCN |
EAR99 |
HS Code |
9024900000 |
|
|
|
* within the 48 continental US States
|
Optional Accessories
more info
|
Mark-10 EMF001-1 Distance Measurement Functions for Series-F
Mark-10 EMF001-1 Distance Measurement Functions for Series-F
|
|
more info
|
Mark-10 EMF002-1 Distance Limits Function for Series-F
Mark-10 EMF002-1 Distance Limits Function for Series-F
|
|
more info
|
Mark-10 EMF003-1 Preload Functions for Series-F
Mark-10 EMF003-1 Preload Functions for Series-F
|
|
more info
|
Mark-10 EMF004-1 High Speed Extension for Series-F
Mark-10 EMF004-1 High Speed Extension for Series-F
|
|
more info
|
Mark-10 EMF005-1 Low Speed Extension Functions for Series-F
Mark-10 EMF005-1 Low Speed Extension Functions for Series-F
|
|
more info
|
Mark-10 EMF006-1 Cycling Functions for Series-F
Mark-10 EMF006-1 Cycling Functions for Series-F
|
|
more info
|
Mark-10 EMF007-1 Break Detection Functions for Series-F
Mark-10 EMF007-1 Break Detection Functions for Series-F
|
|
more info
|
Mark-10 EMF008-1 Load Holding Functions for Series-F
Mark-10 EMF008-1 Load Holding Functions for Series-F
|
|
more info
|
Mark-10 EMF009-1 FollowMe® Functions for Series-F
Mark-10 EMF009-1 FollowMe® Functions for Series-F
|
|
more info
|
Mark-10 EMF010-1 Graphing & Reporting Functions for Series-F
Mark-10 EMF010-1 Graphing & Reporting Functions for Series-F
|
|
more info
|
Mark-10 EMF011-1 PC Control Functions for Series-F
Mark-10 EMF011-1 PC Control Functions for Series-F
|
|
more info
|
Mark-10 EMP001-1 Distance Measurement Package for Series-F
Mark-10 EMP001-1 Distance Measurement Package for Series-F
Distance Measurement (EMF001-1)
Distance Limits (EMF002-1)
Preload (EMF003-1)
|
|
more info
|
Mark-10 EMP002-1 Speed Extension Package for Series-F
Mark-10 EMP002-1 Speed Extension Package for Series-F
High Speed Extension (EMF004-1)
Low Speed Extension (EMF005-1)
|
|
more info
|
Mark-10 EMP003-1 Advanced Functionality Package for Series-F
Mark-10 EMP003-1 Advanced Functionality Package for Series-F Cycling (EMF006-1)
Break Detection (EMF007-1)
Load Holding (EMF008-1)
FollowMe® (EMF009-1)
|
|
more info
|
Mark-10 EMP-COMP-1 Complete Options Package for Series-F
Mark-10 EMP-COMP-1 Complete Options Package for Series-F
Distance Measurement (EMF001-1)
Distance Limits (EMF002-1)
Preload (EMF003-1)
High Speed Extension (EMF004-1)
Low Speed Extension (EMF005-1)
Cycling (EMF006-1)
Break Detection (EMF007-1)
Load Holding (EMF008-1)
FollowMe® (EMF009-1)
|
|
more info
|
Mark-10 AC1094-1 Single column extension, 6 inch / 150 mm, F105 / F305 / F505 / F505H (old part number: ESM301-001-1)
Mark-10 AC1094-1 Single column extension, 6 inch / 150 mm, F105 / F305 / F505 / F505H (old part number: ESM301-001-1)
|
|
more info
|
Mark-10 AC1094-2 Single column extension, 12 inch / 300 mm, F105 / F305 / F505 / F505H (old part number: ESM301-001-2)
Mark-10 AC1094-2 Single column extension, 12 inch / 300 mm, F105 / F305 / F505 / F505H (old part number: ESM301-001-2)
|
|
more info
|
Mark-10 AC1094-3 Single column extension, 24 inch / 600 mm, F105 / F305 / F505 / F505H (old part number: ESM301-001-3)
Mark-10 AC1094-3 Single column extension, 24 inch / 600 mm, F105 / F305 / F505 / F505H (old part number: ESM301-001-3)
|
|
more info
|
Mark-10 AC1095-1 Double column extension, 6 inch / 150 mm, F105 / F305 / F505 (replaces ESM303-002-1)
Mark-10 AC1095-1 Double column extension, 6 inch / 150 mm, F105 / F305 / F505 (replaces ESM303-002-1)
Accommodate up to a 20 in. [508 mm] wide sample, or ø21.5 in [ø546 mm] round sample. Three heights are available – 6, 12 and 24 in [150, 300, and 600 mm]. Base contains rows of T-slots, with available fixture mounting plates.
Compatible with Models F105, F305, and F505 test frames, and Model ESM303 test stand
|
|
more info
|
Mark-10 AC1095-2 Double column extension, 12 inch / 300 mm, F105 / F305 / F505 (replaces ESM303-002-2)
Mark-10 AC1095-2 Double column extension, 12 inch / 300 mm, F105 / F305 / F505 (replaces ESM303-002-2)
Accommodate up to a 20 in. [508 mm] wide sample, or ø21.5 in [ø546 mm] round sample. Three heights are available – 6, 12 and 24 in [150, 300, and 600 mm]. Base contains rows of T-slots, with available fixture mounting plates.
Compatible with Models F105, F305, and F505 test frames, and Model ESM303 test stand
|
|
more info
|
Mark-10 AC1095-3 Double column extension, 24 inch / 600 mm, F105 / F305 / F505 (replaces ESM303-002-3)
Mark-10 AC1095-3 Double column extension, 24 inch / 600 mm, F105 / F305 / F505 (replaces ESM303-002-3))
Accommodate up to a 20 in. [508 mm] wide sample, or ø21.5 in [ø546 mm] round sample. Three heights are available – 6, 12 and 24 in [150, 300, and 600 mm]. Base contains rows of T-slots, with available fixture mounting plates.
Compatible with Models F105, F305, and F505 test frames, and Model ESM303 test stand
|
|
more info
|
Mark-10 AC1085 Control panel tabletop mounting kit for F105 / F305 / F505 / F505H / F755 / F755S / F1505 / F1505S
Mark-10 AC1085 Control panel tabletop mounting kit for F105 / F305 / F505 / F505H / F755 / F755S / F1505 / F1505S
|
|
more info
|
Mark-10 AC1116 USB cable, type C to A for Series F test frames with EasyMESUR®
Mark-10 AC1116 USB cable, type C to A for Series F test frames with EasyMESUR®
|
|
|
|
|
|
|