|
|
Dillon FI-521 LED Load Cell Indicator |
|
| The FI-521 is a bi-directional load cell instrument accepting both positive and negative load cell signals, internally performing the analog to digital conversion at 80 times per second. The FI-521 Indicator features an IP65 stainless steel enclosure for reliable performance in wet or dusty environments. I more ... |
|
Industrial Scales >
Indicators >
Indicators
|
|
|
|
|
|
Features
The FI-521 is a bi-directional load cell instrument accepting both positive and negative load cell signals, internally performing the analog to digital conversion at 80 times per second. The FI-521 Indicator features an IP65 stainless steel enclosure for reliable performance in wet or dusty environments. Included swivel mounting bracket allows for wall or bench mounting. Watertight connections include the AC power cable, 7-pin load cell quick disconnect cable connector and three additional cable ports. The instrument’s 6 key front panel enables all setup, configuration and calibration procedures. FI-521’s calibration procedures include a multi-point calibration feature for correcting the performance of non-linear load cells. The indicator has memory to store calibration information for up to three load cells.
The FI-521 can store peak and first peak values at 80 Hz. Operators can track stored data using date/time information and a 6-digit ID number. The stored data can then be printed or sent to a PC or other device using programmable print and data output formats. The FI-521’s four logic level inputs and the bi-directional serial port can receive control commands from external devices. The instrument can control external devices via any of the two standard cutoff outputs. Also, has on board an analog output that is fully calibrated for 0 to 2.5 VDC.
- 3 cell memory
- 80 Hz peak capture rate
- IP65
- 2 RS-232 serial ports
- RS-485
- 5 point curve linearization
- Built-in real time and date clock
- Units of measure: kgf, lbf, Newton
- 2 set point outputs
- 7-pin load cell quick disconnect (equipped)
- 4 remote keypad inputs
- Analog output
Weight:
5.00 lb
|
|
Other Dillon EDXtreme RED with NO Shackles
| Image |
Name |
Price |
|
|
$5,275.00
|
|
|
$6,185.00
|
|
|
$7,950.00
|
|
|
$10,725.00
|
|
|
$15,185.00
|
|
|
$33,170.00
|
|
|
$46,500.00
|
|
Specifications
|
FI-521 |
| Power Supply |
Input 100 - 240 VAC, 50 - 60Hz internal mounted power supply with output of 12VDC at 2 amps |
| Display |
7 digits, 7-segment, 0.7” (17 mm) ultra-bright LEDs with 14 annunciators.
Max display range -999,999 to 999,999.
Display update rate 10Hz. |
| Keypad |
6 push buttons; select, cell, print, unit, zero, on/off |
| Working Temperature |
-10o C to 40o C (14o F to 10o F) |
| Storage Temperature |
-20o C to 70o C (-4o F to 158o F) |
| Humidity |
10 to 90% RH without condensation |
| Protection |
IP65 |
Load Cell Drive Capacities
|
Excitation Voltage: 5VDC
Capacity: Drives up to eight 350-ohm load cells
Signal Connection: 4 or 6 lead load cells
Load Cell Input Range: -15mV to +15mV
Max Load Cell Output: 3mV/V |
| Communication |
Serial Port 1: Full-duplex RS-232
Serial Port 2: Full-duplex RS-232 or half-duplex RS485
Baud Rate: Selectable 1200-2400-4800-9600-19200/38400-57600 bps
Data Output Format: 8N1, 7O1, 7E1
Serial Output: Select up to 14 additional data parameters
RS-485: 0-5VDC
Analog Output: 0 to 2.5VDC (. 2.5mA)
Remote Input: Select,cell, print, unit, zero, off
Setpoint 1 & 2: 5 to 24VDC (.5A max) external, 5 to 8VDC (. .1A) internal
|
| Analog Circuit Characters |
24-bit A/D converter
A/D Conversion Speed: Peak Force 80Hz; Live Force 10Hz
A/D Conversion: 1mV input will output 100,000 raw counts.
Hardware: low pass fi lter and two programmable digital low pass filters
Max Display Range: -999,999 to 999,999
Division Number Range: 100,000 divisions
|
| Real Clock |
Built-in nonvolatile real time & date |
| Other Main Functions |
Programmable Zero Range
Programmable automatic zero point tracking
Programmable motion detection window
Programmable auto-power off time
Adjustable LED brightness
Units of Measure: kgf, lbf, Newton
Confi gurable serial output content
Two set point output with two data comparison points
|
| Product Code |
AWT05-506170 |
| call for Options |
PCs, printers, remote displays |
|
|
|
|
* within the 48 continental US States
|
|
Optional Accessories
more info
|
Dillon AWT05-506447 Radio/Communicator II with Backlight for EDXtreme RED Dynamometers
Communicator II
The Communicator II can remotely view and control one or several EDXtreme instruments simultaneously via radio frequency. If the EDXtreme is not equipped with radio, then a RS-485 cable will be required between the EDXtreme and Communicator II. Information is easily sent to computer from a radio Communicator II via a serial cable.
Specifications
| Model |
AWT05-506447 |
| Enclosure |
Designed to NEMA 3 / IP54 with optional sleeve. Suitable for protected outdoor use. |
| Instrument Size |
9.5 x 5.0 x 2.5 inch (241 x 127 x 64mm). |
| Accuracy |
Accuracy: Not applicable. Only sends and receives digital information. |
| Display |
128 x 64 dot-graphic LCD display can show full readings up to 5 instruments. |
| Battery Life |
Up to 80 hours continuous radio using (4) AA alkaline batteries. |
| Operating Temperature |
-4° F to 158° F (-20° to 70° C) |
| Connectors |
Sealed connectors may be used for serial communications and wired connection to an EDxtreme dynamometer. |
| RS-232 Communication |
Print or extract data easily. Continuous output can drive a scoreboard. Configurable poll character. |
| Included with Remote |
Carry case and batteries |
| Accessories |
Rubberized case protector sleeve. Remote wall mount bracket. Serial and remote cable assemblies |
| Approval |
CE |
Radio Specifications
| FCC Certified |
For unlicensed low power devices. No radio licensing or permits required for normal operation.* (In the US and Canada. Check local ordinances in other countries.) |
| Frequency |
ISM 2.4 GHz frequency band operates between 2.4 to 2.4835 GHz. |
| Output Level |
10 mW (10 dBm) |
| Display Update Rate |
1 time per second. |
| Number of Links Remote Can Control |
Up to 15 addresses. |
| Configuration Address |
Automatic and configurable |
| Antenna |
Integral antenna. |
| Range |
Open-air range up to 600 feet, line-of-sight. Indoor range dependent upon environment with 300 feet common. Low power radio systems are dependent upon interference levels from other radio systems and environmental conditions. Radio devices are not suitable for all applications. |
|
|
more info
|
Dillon 36057-0022MTS Cable computer serial with 9-pin D connector 12-ft (3.6 m)
Dillon 36057-0022MTS Cable computer serial with 9-pin D connector 12-ft (3.6 m)
|
|
more info
|
Dillon AWT25-501124 Power supply, 100-240 VAC/5V to RS-232 for
Dillon AWT25-501124 Power supply, 100-240 VAC/5V to RS-232 for "Red" EDXtreme
|
|
more info
|
Dillon Option-S Shackle and Spacers for EDX-20T
Dillon Option S Shackle and Spacers for EDX-20TNote that Dillon calibrates with shackles installed and cannot guarantee accuracy with other installations and/or hardware.
|
|
more info
|
Dillon Option-P Spacers Kit for EDX-20T
includes spacers and attaching hardware for both upper and lower shackles.
|
|
more info
|
Dillon Option-R Radio for EDXtreme Dynamometer
Dillon Option-R Radio for EDXtreme Dynamometer
|
|
|
|
|
|
|
|
|
