| Model |
7821
AWT05-508644 |
| Capacity x Readability |
200 lb x 0.05 lb |
| 100 kg x 0.02 kg |
| Legal For Trade |
NTEP approved for use in Class III operations, CC 95-070 |
| Canada Weights and Measures approval CC # AM-5076 Rev 4 |
| Computer Interface |
1 x RS232 (9 way female D Type connector ), 1 x USB HID (Mini USB) or 1x USB VCP (USB-Type B)
Supported |
| Platter Type |
Stainless steel weight platter |
| Display Type |
Flush fitting six digit, ½” high LCD display |
| Number of Displays Allowed |
2 (1 standard, 1 remote display optional) |
| Platter Size |
12" x 14" |
| Base Construction |
Rugged with powder coated die cast aluminum housing and load bridge, housing an aluminum NTEP approved analog load cell |
| Power |
120 VAC (+10% -15%), 60 Hz, standard 3-wire ground |
| Operating Environment |
Temperature: 42° F to 104° F (5° C to 40° C) Relative Humidity: 10 to 95% (non-condensing) |
| Remote Display Housing Sizes |
8” x 3” x 1.5” |
| Operational Keyss |
ZERO: Includes Auto Zero Tracking or Manual push button to re-establish zero reference
UNITS: allows the scale to be easily changed from lb to kg |
| Units of Measure |
lb or kg (lb default)” |
| Configurable Selections |
Capacity, resolution, filters, baud rates, protocols, auto printout, scale or post classifier Default configuration is as postal weight classifier |
| Incremental Selections |
Multiples and sub-multiples of 1, 2, 5 |
| Calibration |
2 point calibration process (zero and span capacity) Field calibration can be carried out by using less than full capacity weights Gravity compensation to allow the local gravity to be entered for where the scale is to be used |
| Internal Resolution |
1 part in 120,000 |
| Self-Diagnostics |
2 level diagnostics: front panel display test or full service diagnostics. (Display, RAM, ROM, input/output & high
resolution x10 division test) |
| Supported Protocols |
Standard NCI default with field configurable settings of 8213, 3835, SMA, with Auto Weight Send (2400 – 19.2K
baud range) Transmits weight and scale status whenever ASCII “W” is sent by a remote device. |
