Mark-10 F505-IM Test frame with IntelliMESUR® software, single license, vertical, 500 lbF / 2.2 kN

Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device

From food packaging to electronics, from consumer products to aerospace manufacturing, Mark-10 force test frames are at home in laboratory and production environments in virtually every industry worldwide.
Peel testing, Wire tensile testing, Compression spring testing, 90° peel testing, Score bend testing, Tension spring testing and more

Rigid and precise mechanical design Exceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position.
Stepper motors and controllers drive a ballscrew and linear guideway for smooth, quiet operation, with virtually no speed variation under load.

Seamless force sensor interface Series FS05 smart force sensors mount directly to the crosshead of models F105, F305, F505, and F505H, without any connection cables. Ranges available from 0.12 to 500 lbF [0.5 N to 2.5 kN]. Accurate to ±0.1% of full scale.
Series R07 S-beam type force sensors accommodate higher force ranges, also compatible with Plug & Test® technology. Ranges available from 50 to 1,500 lbF [250 N to 7.5 kN]. Accurate to ±0.15% of full scale.

Modular design Frame bases can be removed to accommodate column extensions and alternative mounting configurations. Most electronics are housed in a self-contained enclosure, easily accessed and replaced if needed. Integrated T-slots along the column accommodate add-ons, such as a USB hub.

External limit switches Solid-state upper and lower limit switches may be used as test limits or as test exceptions. Dual-graduated rulers aid in switch placement.

An integrated motion control and data collection solution

• Limit testing to a load, break, or distance
• Height measurement
• Load holding
• Cycle testing
• Multi-step testing, utilizing any combination of motion control and data collection functions

Perform individual runs or batches, and view data in graphical format or results tables. Save or export data as needed, or generate a report

Ready. Set. Go. From IntelliMESUR®’s home screen, quickly access up to 10 favorite tests. Associate an image with each favorite for easy identification.

What’s your point of view? Run a test via the Graph or Results views, and switch views as needed. Pass / Fail indicator easily identifies problematic samples. Individual runs may be invalidated if, for example, the sample slips out of the grips, or the test was interrupted.

Graph view The Graph view plots force vs. distance or force vs. time. Overlay up to 10 runs for visual comparisons.

Results view The Results view displays user-selected results for each run. Statistics may be applied to selected results.

Test setup is easy as 1-2-3

Basic tests Select a test type, and IntelliMESUR® will guide you through the setup
Load Limit, Distance Limit, Break Limit, Load Hold, Cycle

1. Pre-Test Settings
• Units of measurement
• Batch size
• Display preferences
• Preload
• Operator prompts

2. Test Settings
• Test objective
• Speed
• Pass / fail limits
• Exception limits

3. Results & Statistics Selection
• Final load
• Maximum load
• Minimum load
• Load at max. distance
• Load at min. distance
• Load at break
• Average load
• Delta load
• Maximum distance
• Final distance
• Minimum distance
• Height
• Distance at max. load
• Distance at min. load
• Distance at break
• Delta distance
• Area under the curve

Multi-step tests Building upon basic test wizards, easily incorporate any combination of steps, with the ability to loop a sequence of steps. Select from:

• Move to load
• Move to distance
• Move to break
• Hold a load or position
• Loop / cycle
• Datum
• Prompts
• Save current load or position
• Zero load or position
• Return to Home position

Operator prompting
Prompts can appear at the beginning of each test, batch, or run.
Ask prompts ask the operator for information which is saved in the results table - for example, a lot number. Type the response or use a barcode scanner. Tell prompts provide instructions to the operator, and can include an image.

Take your measurements to new heights
Use Height Mode to determine height at a specific load, commonly used in spring testing. A datum may be set to define the reference point.

Deflection compensation
Series F test frames and force sensors are deflection-compensated at the factory, resulting in system distance measurement accuracy of ±0.002 in / 0.05 mm at any load and at any position along the frame. To further compensate grips and attachments, use IntelliMESUR®’s deflection compensation utility. The deflection offset file can be associated with the test setup file.

Robust data acquisition and management

Blazingly fast
Force sensor sampling rate of 20,000 Hz yields accurate peak measurements even in quick-duration events. IntelliMESUR® collects load and travel data at up to 1,000 Hz, and allows up to 1 million data points per run.

Customizable reporting
Print or create a PDF report, including results, statistics, graph, system and user information, and comments. Personalize the report with your company logo and an additional image. Create report templates to save with future reports.

Save or export data
Automatically or manually save individual runs and results to a USB drive or file location of your choice. File names are automatically generated with the test name and time stamp, for quick searchability. Results sets and data from individual runs may also be exported as .csv files.

• Administrators have full access.
• Supervisors can create a test, run reports, calibrate force sensors, and change settings.
• Operators may recall and run a test, but cannot create a test or perform more advanced functions.

Intelligent manual control
Manually control the test frame to obtain quick force and distance results, or manually position the crosshead prior to a test. Select from several actuation methods, including momentary (button-hold), maintained (button release) motion, jog mode with three distance presets.

With Mark-10’s innovative FollowMe® function, push and pull on the force sensor to move the crosshead. Apply greater force to achieve faster motion. FollowMe® is responsive enough for quick positioning as well as fine adjustments.

The Height / Length Offset utility in Manual Control defines a reference point to accommodate applications in which grips cannot directly touch one another.

Uniquely serviceable

Calibrate force sensors on the test frame or off-site

Calibrate Series FS05 and R07 force sensors in one of two ways:

Test frame IntelliMESUR® provides an integrated utility, with an intuitive step-by-step wizard. Manual controls allow the technician to use the test frame to apply tension and compression forces.

Off-site Conveniently remove the force sensors for off-site calibration with a Mark-10 Model M7I or M5I indicator

Field-upgradeable Test frame firmware and IntelliMESUR® software can be updated in the field via a simple user interface. No need to schedule a service call or to ship hardware to the factory.

Easy-to-service electronics Most electronics are housed in an integrated module, easily replaced without special tools or processes.

In The Box

• Column Extensions for Models F105 / F305 / F505 / F505H Select from single- and double-column extensions for oversized samples. Three heights are available - 6, 12 and 24 in [150, 300, and 600 mm]. Double-column extensions accommodate up to a 20 in. [508 mm] wide sample, or ø21.5 in [ø546 mm] round sample. Base contains rows of T-slots for fixture mounting. Double column extensions not available for F505H.
• Certificate of Calibration - Distance & Speed (CERT-DS) NIST-traceable certificate of calibration for test frame distance measurement and speed.
• Safety Shield for Models F105 / F305 / F505 (AC1086) Provides pinch and sample debris protection for the operator. The shield rotates open and closed with smooth, effortless actuation. An electrical interlock prevents test stand operation while the door is open. Includes a remote emergency stop switch.
• Safety Shield for Models F755 / F755S / F1505 / F1505S (AC1092-1, AC1092-2) Provides pinch and sample debris protection for the operator. An electrical interlock prevents test stand operation while the door is open. The tablet control panel and included remote emergency stop switch can be mounted to the shield’s extruded frame. Also compatible with Models F105, F305, and F505 with up to 24 in / 600 mm column extensions.
• USB Hub (AC1093) Test frame-mounted 4-port USB hub improves cable management and conveniently accommodates peripherals, such as a flash drive, barcode scanner, etc. Compatible with all Series F test frames
• Adapter, FS05 to Plug & Test® Connector and Extension (AC1083, AC1084) Adapts a Series FS05 force sensor or PTAF sensor adapter to Plug & Test® type interface, for ease of external calibration via a Mark-10 indicator. Also permits mounting of a Series FS05 sensor to Models F755, F755S, F1505, and F1505S test frames. Shown above with Model M5I indicator and AC1084 extension cable (48 in. / 1,220 mm).
• Third-party Force Sensor Adapter (PTAF) Adapts a user-supplied force sensor to Models F105, F305, F505, and F505H test frames, and Models M5I and M7I indicators. AC1083 adapter required for Models F755, F755S, F1505, and F1505S test frames. Use the included software utility to select from a library of common force capacities. Requires a Model M5I or M7I indicator for configuration.