| Model |
LMA110-SET-P |
LMA100-SET-P |
| Capacity x Readability |
40 x 0.001 g |
100 x 0.0001 g |
| Reproducibility |
1 mg |
0.1 mg |
| Calibration |
External |
Internal or External |
| Display of results |
0.01% |
| Reproducibility of the measurement |
Starting at an initial sample weight of approx. 1 g: ± 0.2%
Starting at an initial sample weight of approx. 5 g: ± 0.05% |
| Method of measurement |
Loss on Drying |
| Recommended moisture range |
1.00–99.90% |
| Heat source |
Four parallel infrared quartz cylinders |
| Modular configuration |
Optional up to 4 heater modules connectable |
| Internal printer |
Optional internal thermal printer, 40 character graphic |
| Temperature range and adjustment |
30–210°C in one-degree increments |
| Temperature steps |
Programmable, one or two |
| Standby temperature |
Standby temperature selectable from 30–160°C |
| Temperature display |
Display of target temperature and actual temperature during the measurement and in standby mode |
| Measured value display |
Weight loss in mg
% moisture
% dry weight
% volatiles
% moisture/dry weight
|
| Modes of operation |
Standard Test or Concentration mode |
| Endpoint determination |
Timer mode, value falls below a defined weight loss per time unit (%/min), trend shutoff |
| Program storage |
60 programs, fail-safe storable |
| Data storage |
Storage 999 results with statistics: average, SD, RSD, high and low |
| Temperature adjustment |
Optional fixture for internal electronic two-point-adjustment |
| Adjustment of the weighing system |
External manual |
| Ideal initial weight |
Audio and visual display for programmable target sample weight addition
|
| Initial sample weight lock |
Lockable initial sample weight for optimal repeatability |
| Pass-Fail-function |
Programmable target value including limiting values, pass-fail-information after the measurement |
| Sample-ID |
Numeric, numeric incrementing, alphanumeric or turned off |
| User management |
20 users password protected storable |
| Password protection |
Password protection against undesired adjustment of parameters |
| Languages |
English, Spanish, German, French, Italian, Portuguese |
| Date and time settings |
dd|mm| yy, mm|dd| yy, 12 h- or 24 h-format |
| Saving mode |
Integrated clock timer to switch on and turn off the analyzer Programmable sleeping mode after a longer period of non-use |
| Display |
Illuminated VGA-display |
| Parameter and data input |
Sealed membrane witht audible tactile feedback |
| Real-time curves |
Real-time curves of the loss in weight (% or gram) as well of the temperature pattern during and after the measurement |
| Acoustical signals |
Key stroke, ideal weight met and end of test, selectable on or off |
| System status indicator lights |
Two tri-color LEDs (balance & heater) on front of heater module |
| Data input|output |
Serial and Ethernet |
| Printout of the protocol |
Internal thermal printer, 40 character graphic |
| Printout format |
Configurable printout: selectable header (3 lines), analyzer info, operator, Sample ID, calibration info, program name, program parameters, interval print, weight info, result and signature line |
| Weighing system |
Monolithic weighing system for high-precision results |
| Balance spill protection |
Reservoir under draft shield to collect liquids, powders or pellets |
| Operating conditions |
15–40°C (59–104°F) | 10–85% rel. humidity, no condensation |
| Power requirements |
90-250 VAC 50|60 Hz self-adjusting power supply |
| Housing dimensions (W+D+H) |
41.3 x 49.5 x23.5 cm (164 x 191 x 94 in) modules combined |
| Weight |
10 kg (22 lbs.) modules combined |
| Warranty |
2 years |
