|
AND Weighing GF-32001M High Capacity Apollo Balance 32.2 kg x 0.1 g |
|
The occurrence of accidents, such as those that follow, whether expected or unexpected, can cause serious damage to your balance or problems with your measurements. The new A&D Apollo High Capacity, GX-M/GF-M series, is designed to provide excellent protection from these accidents, preventing loss due to downtime while also guaranteeing maximum productivity more ... |
Laboratory Equipment >
Analytical Balances >
Tenth of a Gram - 0.1 g
|
Specifications Chart
|
Have Questions? Our Staff will be glad to help |
Capacity x Readability
32.2 kgx 0.1 g
Pan Size
10.62 x 8.26 in
|
|
|
|
|
|
|
Features
The occurrence of accidents, such as those that follow, whether expected or unexpected, can cause serious damage to your balance or problems with your measurements. The new A&D Apollo High Capacity, GX-M/GF-M series, is designed to provide excellent protection from these accidents, preventing loss due to downtime while also guaranteeing maximum productivity.
Common accidents in weighing 1: Spillage Weighing of powder or liquid materials for filling, formulating, etc., always carries a risk of spillage, which could damage the balance.
IP65 dust and waterproof A&D Apollo High Capacity balances, which are IP65 rated, permit no ingress of dust, and can withstand water projected from any direction, as defined by the IEC/EN standard 60529.
Common accidents in weighing 2: Impact shocks The weight sensor of a high-precision balance will be damaged if continually affected by loads with acceleration (impact shocks). This typically occurs in factories where objects are placed roughly by machines or operators onto balances. In addition, impact shocks can easily shift values and cause errors.
Impact shock detection (ISD) Impact-Alert A&D Apollo High Capacity balances visualize the magnitude of impact shocks received by the weight sensor at four levels. Also, one beep is emitted if a Level 3 shock is received, and two beeps are emitted if a Level 4 shock is received (both of which should be avoided).
Shock-Log
While the power is on, up to 50 impacts of Level 3 and Level 4 will be stored in the balance with a timestamp (and log-in user information when the password lock function is used).
*1 This function is especially beneficial for quality managers, as it enables them to check and show how their balances were treated during use.
Cushioning mechanism The two leaf springs that support the weighing pan mitigate impact shocks significantly
Common accidents in weighing 3: Power failure Power supply may be interrupted suddenly in the middle of measurement, spoiling your work.
Tare memory
When this function is activated, the tare value is saved in non-volatile memory, and the net value displayed before the power failure occurred is restored once the balance is turned on again. This also allows for the balance to be turned off during weigh-in or loss-in-weight measurement when necessary.
Auto power ON/OFF The weighing mode display is automatically activated when AC power is supplied, so there is no need to press the ON/OFF key as the power comes back on, which is useful when the balance is part of an automated weighing system. Meanwhile, the balance can be set to switch off the display automatically after 10 minutes of inactivity to save power.
Common accidents in weighing 4: Misuse People may change the balance configuration or sensitivity without permission.
User access control (UAC) and key lock
A&D Apollo High Capacity balances can be password-protected in two ways: The first way is to limit use to authorized individuals (up to 11 including one administrator—the administrator can perform all operations while other users are limited to measurements and calibration*2 only) by setting a password for each user. The second way is to set a password for just the administrator, allowing anyone else to use the balance without entering a password, but for measurements and calibration*2 only.
Moreover, upon receiving a command to disable its keys, the balance becomes operable only by sending commands from an external device, such as a PC.
*2 The administrator can inhibit calibration also so that others can perform measurements
Accuracy and precision management Automatic self calibration (ASC)*3
To ensure accuracy at all times, models with an internal weight (i.e. GX-M series) can be set to calibrate themselves automatically either (1) in response to change in ambient temperature to prevent error due to sensitivity drift, (2) at a set interval time, or (3) at predetermined (up to three) times of the day. Internal calibration can also be performed any time with one key press.
*3 Available for the GX-M series
Automatic precision assessment (APA) In APA, the balance first makes quick diagnoses on whether there is a critical failure (Dia-Check), and then shows a repeatability test result (Standard Deviation) as well as the minimum weight (QuickMin-S) calculated using an electronically controlled load (ECL).*4 It only takes 1.5 minutes and can be readily included in a daily check SOP.
*4 ECL is A&Ds patented technology of generating a minute load (0.3 to 3% of the balance capacity) by purposely altering the equilibrium state of the electromagnetic force restoration sensor.
Automatic minimum weight calculation and implementation You can enter the minimum weight into the balance by either direct key input, using the result of QuickMin-S, or having the balance calculate it from 10 repeated measurements of an actual, external weight (the tolerance can be set to either 0.1% pursuant to USP Chapter 41, or 1%).
Further, to ensure that the measured sample amount meets the minimum weight requirement, the balance can display an alert until the sample amount reaches the value entered as the minimum weight (Min-S Alert).*5
*5 Only when g is selected as the unit of measure
Data output/communication RS-232C and USB interfaces as standard
The USB interface can be toggled between Quick USB mode (plug-and-play with weighing data output to a PC only) and Virtual COM mode (for bi-directional communication*6) using the internal settings. A USB cable (1.8 m) is provided as standard.
*6 For PCs with a Windows version other than Windows 10, a special driver downloaded from the A&D website needs to be installed
Universal Flexi Coms (UFC) This function enables customization of printout content and layout by editing and sending commands to the balance (a dedicated software, WinCT-UFC, is available as a free download). Following the commands, the balance creates data to be output to either a printer capable of dump printing, such as the AD-8127 compact printer, or a commercially-available label printer*7 for barcode printing.
*7 A label printer that supports ZPL or ZPL II (ZPL and ZPL II are registered trademarks of ZIH Corp.)
Gross/Net/Tare output Upon receiving a command, or with key operation, the balance can also output the gross, net, and tare values
Special application function Flow rate display (FRD) FR-Cal
The balance can calculate and display/output the mass flow rate (the unit of measure can be selected from g/s, g/m or g/h), or the volume flow rate (mL/s, mL/m or mL/h) by entering the density of the material,*8 by itself. This function makes flow rate measurement much easier and more precise than manual calculation using a stopwatch. A dedicated graphing software, WinCT-FRD, is available as a free download.
*8 Up to 10 densities can be saved to the balance.
FR-Compare
The balance indicates whether the flow rate is maintained within the designated limits (either 3 levels or 5 levels). The results can be output using the optional GXM-04 interface.
Options
GXM-04 *9*10 - Comparator relay output/buzzer/RS-232C/external key input interface
GXM-06 *9*10 - Analog (0-1/0.2-1 V) output/RS-232C interface
GXK-012 - Animal weighing pan
GXK-015 - Carrying case
GXM-27 *9*11 - Bluetooth® interface
- *9 Only one of GXM-04, GXM-06, GXM-27, or the standard (RS-232C and USB) interfaces can be used.
- *10 The GX-M/GF-M series are not IP65 with GXM-04 or GXM-06.
- *11 Please contact your local A&D representative to find out whether GXM-27 is certified for compliance with Bluetooth® communication laws in your country.
Accessorie
- AD-1682 - Rechargeable battery unit
- AD-1683 - Static eliminator
- AD-1684A - Electrostatic field meter
- AD-1687 - Weighing environment logger
- AD-1688 - Weighing data logger
- AD-8127 - Compact printer
- AD-8526 - Serial/Ethernet (TCP/IP) converter
- AD-8920 - Remote display
- AD-8922A - Remote controller
- AX-USB-9P - Serial/USB converter with cable
- AX-KO2737-500 - Waterproof RS-232C cable (5 m)
Weight:
20.00 lb
|
|
Other AND Weighing GF High Capacity Apollo Scales |
Add to Cart for Warranty Information |
Image |
Name |
Price |
|
|
$1,915.02
|
|
|
$2,269.87
|
|
|
$1,915.02
|
|
|
$2,381.31
|
|
|
$2,434.10
|
|
|
$1,857.34
|
|
|
$2,181.89
|
|
|
$2,551.41
|
Specifications
With External Cal |
GF-8202M |
GF-8202MD |
GF-10202M |
GF-12001M |
GF-22001M |
GF-32001M |
GF-32001MD |
With Internal Cal |
GX-8202M |
GX-8202MD |
GX-10202M |
GX-12001M |
GX-22001M |
GX-32001M |
GX-32001MD |
Capacity x Readability |
8.2 kg x 0.01 g |
2.2 kg x 0.01 g 8.2 kg x 0.1 g |
10.2 kg x 0.01 g |
12.2 kg x 0.1 g |
22.2 kg x 0.1 g |
32.2 kg x 0.1 g |
6.2 kg x 0.1 g 32.2 kg x 1 g |
Repeatability (standard deviation) |
0.01 g |
0.01 g / 0.05 g |
0.01 g |
0.1 g |
0.1 g |
0.1 g |
0.1 g / 0.5 g |
Linearity |
±0.03 g |
±0.02 g / ±0.1 g |
±0.03 g |
±0.2 g |
±0.2 g |
±0.2 g |
±0.2 g / ±1 g |
Stabilization time (typical when set to FAST) |
Approx. 1.5 seconds |
Sensitivity drift (10 to 30 °C/50 to 86 °F, when automatic self calibration is OFF) |
±2 ppm/°C |
±3 ppm/°C |
±2 ppm/°C |
±3 ppm/°C |
±3 ppm/°C |
±3 ppm/°C |
±5 ppm/°C |
Accuracy immediately after internal ca libration (for the GX-M series)*ii |
±0.15 g |
±0.3 g |
±0.3 g |
±1.0 g |
±1.0 g |
±1.5 g |
±3 g |
Operating environment |
5 to 40 °C (41 to 104 °F), 85%RH or less (no condensation) |
Data memory |
200 weighing results + 50 calibration results (with timestamp), 50 unit masses for counting mode, 20 sets of upper/lower limit values for comparator mode, and 20 tare values |
Display refresh rate |
5 times/second, 10 times/second, or 20 times/second |
Units of measure |
g (gram), kg (kilo gram), oz (ounce), lb (pound), lb-oz (pound-ounce), ozt (troy ounce), ct (metric carat), mom (momme), dwt (pennyweight), gr (grain), pcs (counting mode), % (percent mode), SG (density mode), and a user-programmable unit |
Counting mode: Minimum unit mass |
0.01 g |
0.1 g |
0.01 g |
0.1 g |
0.1 g |
0.1 g |
1 g |
Counting mode: Number of samples |
10, 25, 50 or 100 pieces |
Percent mode: Minimum 100% reference mass |
1 g |
10 g |
1 g |
10 g |
10 g |
10 g |
100 g |
Percent mode: % readability |
0.01%, 0.1% or 1% (depends on the reference mass stored) |
Communication interface |
RS-232C and USB |
Applicable calibration weight value |
2 kg, 3 kg, 4 kg, 5 kg, 6 kg, 7 kg, 8 kg |
2 kg, 3 kg, 4 kg, 5 kg, 6 kg, 7 kg, 8 kg, 9 kg, 10 kg |
5 kg, 10 kg |
5 kg, 10 kg, 20 kg |
10 kg, 20 kg, 30 kg |
Weighing pan size |
270 x 210 mm |
External dimensions |
300 (W) x 355 (D) x 111 (H) mm |
Net weight |
GX-M: Approx. 9.3 kg / GF-M: Approx. 8.3 kg |
Dust and waterproof rating |
IP65 |
Power supply / consumption |
AC adapter / approx. 30 VA |
Standard accessories |
Display cover, AC adapter, USB cable (1.8 m), Simple breeze break (for the GX/F-8202M, GX/F-8202MD, and GX/F-10202M only) |
- *i Smart range function: Automatically switches between the precision and standard ranges, and recovers the full precision range with a press of the RE-ZERO (tare) key.
- *ii Under a stable environment: No rapid temperature/humidity change, vibration, draft, magnetism, static, etc., between 10 °C and 30 °C (50 °F and 86 °F). The mass of the internal weight may vary with age.
- *iii One additional unit from tael (Singapore/HK jewelry/Taiwan), tola, or Newton can be added upon request. Grain is not available with the GX/F-32001MD.
|
|
|
* within the 48 continental US States
|
Optional Accessories
more info
|
AND Weighing GXA-03 2nd RS-232C interface Factory Installed Only
AND Weighing GXA-03 2nd RS-232C interface
Only one of GXA-03, GXA-04, GXA-06, FXi-08, GXA-09, GXA-23-PRINT/REZERO/PLUG, GXA-24, GXA-25 or GXA-26 can be installed.
|
|
more info
|
AND Weighing GXA-04 Comparator Output (Cable: MiniDIN 8 pin Male to Loose end) Factory Installed Only
AND Weighing GXA-04 Comparator Output (Cable: MiniDIN 8 pin Male to Loose end)
|
|
more info
|
AND Weighing GXA-06 Analog Output (Cable: MiniDIN 4 pin Male to Loose end) Factory Installed Only
AND Weighing GXA-06 Comparator Output (Cable: MiniDIN 8 pin Male to Loose end) Only one of GXA-03, GXA-04, GXA-06, FXi-08, GXA-09, GXA-23-PRINT/REZERO/PLUG, GXA-24, GXA-25 or GXA-26 can be installed.
|
|
more info
|
AND Weighing GXA-09 Internal Rechargeable Battery Factory Installed Only
AND Weighing GXA-09 Internal Rechargeable Battery Factory Installed Only
Only one of GXA-03, GXA-04, GXA-06, FXi-08, GXA-09, GXA-23-PRINT/REZERO/PLUG, GXA-24, GXA-25 or GXA-26 can be installed.
|
|
more info
|
AND Weighing GXA-10 Large Glass Breeze Break
AND Weighing GXA-10 Large Glass Breeze Break The glass panes disappear into the back when opening the door, requiring no extra space at the rear of the balance. Easily attachable/detachable
|
|
more info
|
AND Weighing GXA-12 Animal Weighing Pan for Apollo Series Models of 320g Capacity or Higher
AND Weighing GXA-12 Animal Weighing Pan for Apollo Series Models of 320g Capacity or Higher
|
|
more info
|
AND Weighing GXA-13 Density Determination Hit for Apollo Series 1mg Models Only
AND Weighing GXA-13 Density Determination Hit for Apollo Series 1mg Models Only Makes weighing the sample in air and in water quicker, easier and more precise. The GX-A/GF-A series can then perform a density calculation automatically
|
|
more info
|
AND Weighing GXA-17 Large Glass Breeze Break with built-in Fanless Ionizer Static Sliminator
AND Weighing GXA-17 Large Glass Breeze Break with built-in Fanless Ionizer Static Sliminator The fanless ionizer can neutralize even extremely fine powders without disturbance
|
|
more info
|
AND Weighing GXA-23-RZERO External key input interface with the AX-SW137-REZERO foot switch - Factory Installed Only
AND Weighing GXA-23-REZERO External key input interface with the AX-SW137-REZERO foot switch - Only one of GXA-03, GXA-04, GXA-06, FXi-08, GXA-09, GXA-23-PRINT/REZERO/PLUG, GXA-24, GXA-25 or GXA-26 can be installed. Factory Installed Only
|
|
more info
|
AND Weighing GXA-23-PLUG External Key Input Interface with the AX-T-314A-S Plug - Factory Installed Only
AND Weighing GXA-23-PLUG External Key Input Interface with the AX-T-314A-S Plug - Only one of GXA-03, GXA-04, GXA-06, FXi-08, GXA-09, GXA-23-PRINT/REZERO/PLUG, GXA-24, GXA-25 or GXA-26 can be installed. Factory Installed Only
|
|
more info
|
AND Weighing GXA-24 USB host interface Factory Installed Only
AND Weighing GXA-24 USB host interface Only one of GXA-03, GXA-04, GXA-06, FXi-08, GXA-09, GXA-23-PRINT/REZERO/PLUG, GXA-24, GXA-25 or GXA-26 can be installed. Accepts an off-the-shelf USB flash drive to save weighing results in CSV format.
|
|
more info
|
AND Weighing GXA-25 External Fanless Ionizer Static Eliminator Factory Installed Only
AND Weighing GXA-25 External Fanless Ionizer Static Eliminator Only one of GXA-03, GXA-04, GXA-06, FXi-08, GXA-09, GXA-23-PRINT/REZERO/PLUG, GXA-24, GXA-25 or GXA-26 can be installed. Power is supplied from the balance. Activated for a set duration with an IR sensor. Factory Installed Only
|
|
more info
|
AND Weighing GXA-26 External IR switch Factory Installed Only
AND Weighing GXA-26 External IR switch Factory Installed Only Only one of GXA-03, GXA-04, GXA-06, FXi-08, GXA-09, GXA-23-PRINT/REZERO/PLUG, GXA-24, GXA-25 or GXA-26 can be installed. For touchless operation of print or re-zero (tare). Factory Installed Only
|
|
more info
|
AND Weighing GXA-27 Bluetooth Interface Factory Installed Only
AND Weighing GXA-27 Bluetooth Interface Only one of GXA-03, GXA-04, GXA-06, FXi-08, GXA-09, GXA-23-PRINT/REZERO/PLUG, GXA-24, GXA-25 or GXA-26 can be installed. GXA-27 is a Bluetooth communication option. By pairing specific product, PC, tablet or smartphone equipped with Bluetooth function, you can communicate with the balance. Dust and waterproof balances can communicate with Bluetooth device by using GXA-27 maintaining its performance.
|
|
more info
|
AND Weighing GXA-31-1EA Protective In-Use Cover 1 each BA Series
A&D Weighing Display Covers (1 pcs),GXA-31-1EA |
Product Type |
Cover |
Qty/pk |
1 |
Brand |
A&D Balances |
Manufacturer number |
GXA-31-1EA |
|
|
more info
|
AND Weighing GXA-31-5PK Protective In-Use Cover 5 each Apollo Series
A&D Weighing Display Covers (5 pcs),GXA-31-5PK |
Product Type |
Cover |
Qty/pk |
5 |
Brand |
A&D Balances |
Manufacturer number |
GXA-31-5EA |
|
|
more info
|
AND Weighing FXi-08 Ethernet interface with WinCT-Plus software for FXi--Series
AND Weighing FXi-08 Ethernet interface with WinCT-Plus software for FXi--Series
FXi-02, FXi-08 and FXi-09 cannot be used at the same time.
(Not IP65 compliant when used with FX-iWP and FZ-iWP)
|
|
more info
|
AND AD-1682 Rechargeable Battery Pack
Rechargeable Battery Pack for AND Weighing balances
|
|
more info
|
AND Weighing AD-8526-9:Ethernet Adapter D-Sub 9 with WinCT Plus
AND Weighing AD-8526-9:Ethernet Adapter D-Sub 9 with WinCT Plus
|
|
more info
|
AND AD-8920A Universal Remote Display
Universal Remote Display for AND Weighing balances
Connects to A&D’s balances and scales using either RS-232C or current loop
Includes an AC adapter and a communication cable that matches your instrument
Recognizes the balance/scale baud setting automatically
Large and bright VFD display
|
|
more info
|
AND Weighing AD-100-2 Anti-theft Device
Anti-theft Device for AND Weighing Everest digital balances
|
|
more info
|
AND SW-128 Foot Switch
Foot switch for AND Weighing balances
|
|
more info
|
AND Weighing TB:648 120V/220V AC Adapter
Compatible with the following units: Phoenix GH Series, Gemini GR Series, Galaxy HR Series, Orion HR Series, GF Series, GX Series, FZ Series, FX Series, BM Series, MC Series, AD Pipette Series
|
|
more info
|
AND Weighing AD-8529PC-W Bluetooth Converter for PC
The AD-8529PC/PR-W Bluetooth® converters enable wireless communication between a balance/scale and a PC/printer using Bluetooth® technology (line-of-sight distance approx. 10 m when there is no radio wave interference).*2
- *1 A&D no longer produces the AD-8121B compact printer and now offers the AD-8127 instead.
- *2 Please contact your local A&D representative to find out whether the AD-8529PC/PR-W is certified for compliance with Bluetooth® communication laws in your country.
AD-8529PC-W:
For communication between a balance/scale and a PC. Plug and play with Windows 10. (For earlier versions of Windows, install the driver
Driver software for the AD-8529PC-W (Bluetooth converter for PC)
Download here
|
|
more info
|
AND Weighing AD-8529PR-W Bluetooth Converter for Printer
The AD-8529PC/PR-W Bluetooth® converters enable wireless communication between a balance/scale and a PC/printer using Bluetooth® technology (line-of-sight distance approx. 10 m when there is no radio wave interference).*2
- *1 A&D no longer produces the AD-8121B compact printer and now offers the AD-8127 instead.
- *2 Please contact your local A&D representative to find out whether the AD-8529PC/PR-W is certified for compliance with Bluetooth® communication laws in your country.
AD-8529PR-W:
For communication between a balance/scale and an A&D printer. No AC adapter is required when used with the AD-8127.
|
|
more info
|
AND Weighing AD-8127 Compact Multi-Function Printer
Features
- Easy setting and operation with a numeric keypad and
LCD display
- Built-in calendar and clock for printing date and time
at any time
- Sends re-zero and weighing data request commands to
the balance/scale
- Clear and visible dot matrix printing, which also enables long-term preservation of the
printed records
- Compact and lightweight for portability and installation anywhere
- Interval printing mode for printing weighing data at set intervals
- Chart printing mode for printing time-series variations of weighing data
- Dump printing mode to receive and print GLP/GMP/GCP/ISO compliant output from
the balance/scale
- Performs and prints the results of statistical calculation including standard deviation
- Prints an ID number set for the printer at any time
- Two types of RS-232C cables (D-Sub 25P and D-Sub 9P) provided as standard to
connect to balances/scales with different interfaces*
- Receives a print, paper feed, print statistical calculation results, print total, re-zero, or
weighing data request command from the optional foot switch (AX-SW128)
Character specifications |
7 × 9 dots, 1.6 (W) × 3.2 (H) mm |
Printing speed |
Approx. 1.6 lines/second |
Paper feeding speed |
Approx. 4 lines/second |
Number of characters printed |
24 characters/line |
Printer paper width |
57.5 mm |
Operating environment |
0 to 40 °C/32 to 104 °F, 35 to 85%RH (no condensation) |
Storage environment |
-20 to 60 °C/-4 to 140 °F, 10 to 90%RH (no condensation) |
Interface |
RS-232C (D-Sub 9P, male) / Current loop (DIN) |
Power supply |
AC adapter |
Size / weight |
174 (W) × 141 (D) × 87 (H) mm / approx. 500 g |
Standard accessories |
Ink ribbon (1 pc), plain printer paper (1 roll), AC adapter, AC adapter label, instruction manual, two RS-232C cables (D-Sub 25P and D-Sub 9P)* |
|
|
more info
|
AND Weighing -AD-1687 - Weighing Environment Logger
Data capacity |
Maximum 10,000 sets (including date and time) |
Interval time |
1, 2, 5, 10, 15, 20, 30 seconds, 1, 2, 5, 10, 15, 20, 30, 60 minutes |
Power supply |
Two LR6 (AA) batteries, RS-232C, or USB |
Battery life |
Approx. 6 months (with measurement interval at 1 minute, alkaline batteries) |
Clock accuracy |
Maximum ±1 minute/month |
Compatible operating systems |
Windows 2000 / XP / Vista / 7 (32 / 64 bit) |
Operating environment |
0 to 60 °C / 32 to 140 °F, 85% RH or less (no condensation) |
Dimensions |
127 (W) × 90 (H) × 36 (D) mm (including the protective cover) |
Weight |
Approx. 275 g (including batteries and the protective cover) |
Standard accessories |
Three RS-232C cables for weighing instruments (9-pin D-Sub, 25-pin D-Sub, and 7-pin DIN, 1 m), USB cable (1 m), Two LR6 (AA) batteries (for operation check), Protective cover, Instruction manual |
Sensor |
Resolution |
Measurement range |
Accuracy |
Temperature |
0.1 °C ,0.1 °F |
0.1 °F 0 to 60 °C ,32 to 140 °F |
32 to 140 °F ±0.5 °C (20 to 30 °C),±0.9 °F (68 to 86 °F) |
Relative humidity |
0.1% RH |
0 to 100% |
<±3% (20 to 80%)/td>
|
Barometric pressure |
0.1 hPa |
500 to 1100 hPa |
hPa ±3 hPa (0 to 60 °C) |
Vibration |
1 mG |
0 to 2000 mG |
±20%, static acceleration |
|
|
more info
|
AND Weighing- AD-1688 -Weighing Data Logger
AD-1688 |
Specifications |
Application devices |
Balances and scales manufactured by A&D with an RS-232C connector |
Memory size |
Approx. 5,000 data sets in the standard format (15 characters in 1 data set) can be stored |
Clock error |
±1 minute / month |
Applicable OS |
Windows 2000 / XP / Vista |
Dedicated power supply |
Not required. Power is supplied by the weighing instrument or PC. |
Operating environment |
50°F - 86°F (5°C - 40°C ), 85%RH or less (no condensation) |
Dimensions |
Approx. 2.1 oz (60 g) |
Weight |
Approx. 2.1 oz (60 g) |
|
|
more info
|
AND Weighing AD-1689 Calibration weight tweezers, pack of 5
With a length of 210 mm, the tweezers allow a weight to be placed in a weighing pan without having to put a hand inside the chamber. This prevents convection flow that is normally attributed to heat coming from the hand. |
Each tweezer is made from austenitic stainless steel (SUS304), therefore heat from the hand is unlikely to be transmitted to the weight via the tweezers. This is especially effective for the precise measurements required of analytical balances.
|
Tips of the tweezers are covered in resin to prevent the weight from slipping. The hilt is also covered with resin for easy gripping. |
|
|
more info
|
AND Weighing AD-1691 -Weighing Environment Analyzer
|
|
Display |
TFT color LCD with backlight (7 inches, 800 x 480 dots) |
LCD backlight brightness |
Adjustable to 10 levels |
Data transmission |
RS-232C × 3, USB (1.1) × 2 |
Power supply |
AC adapter |
External dimensions |
203 (W) × 153 (D) × 58 (H) mm, excluding protrusions |
Net weight |
Approx. 1.0 kg |
|
|
more info
|
AND Weighing AD-8526-25:Serial / Ethernet Converter
The AD-8526 can connect the RS-232C interface of an A&D weighing instrument to the Ethernet (LAN) port of a computer that is not equipped with an RS-232C interface.
|
|
more info
|
AND AD-8922A Remote Controller
Remote Controller for AND Weighing balances
Displays weighing data Remotely controls a weighing instrument with key operations (no access to the internal settings) Outputs weighing data to another external device such as a PC or printer via the RS-232C connection Optional BCD, comparator, and analog outputs available Can be panel-mounted
|
|
|
|
|
|
|