Optional Hardware
Digital Travel Display
12” [300 mm] travel, 0.0005” [0.01 mm] resolution, 0.001” [0.03 mm] accuracy, SPC output for automated data collection. For output of travel data to a PC, the following items are required: 09-1066 cable and MRS100A communication adapter.
Milti-function cable, Series 5/4 gauge to controller
Connects a Series 5 or 4 force gauge to the controller. This single cable is used to transmit set
points, overload signals, and force data.
Serial cable, controller to PC
Bi-directional communication with a PC for computer control. Also sends force data from the controller
to a PC.
Optional Controller Features
Any of the below option packages may be purchased at time of order or
may be added in the field at a later date by entering an activation code
Computer Control
An RS-232 port is provided to interface with a PC. The ESMH-DC accepts a number of
commands pertaining to test stand motion and force gauge functions*. The following
additional items are required for PC control:
- Series 5 force gauge
- 09-1056 serial cable (see Optional Equipment)
- 09-1162 multi-function cable (see Optional Equipment)
Overlaod Protection
Protects a force gauge against overload (requires a Series 5 or 4 force gauge and
09-1162 cable). The user programs the desired percentage of full scale of the gauge.
Adjustable analog output voltage setting allows the test stand to interface with virtually
any force gauge with analog output.
Auto-return
The crosshead moves to a limit switch or force set point (requires a Series 5 or Series 4 force gauge and 09-1162 cable), stops, and reverses direction at maximum speed to the other limit switch or set point.
Cycling / Dwell Time
The crosshead moves up and down between limit switches or force
set points (requires a Series 5 or Series 4 force gauge and 09-1162
cable). Configurable up to 99,999 cycles. Dwell time allows the
operator to program the amount of time, up to 9,999.9 seconds, in
0.1 second intervals, for which the crosshead pauses at limits.
Programmmable LEFT and RIGHT button Functions
LEFT and RIGHT button operation can be configured in three userconfigurable
modes: Maintained: a short push produces continuous
motion until STOP is pressed, Momentary: crosshead moves only
while the button is pressed, and Auto: short push produces maintained
motion, while holding down the button will produce momentary
motion.
Independent left and right speeds
Programmable independent speeds for left and right directions
Password Protection
Prevents unauthorized changes to test parameters
* Contains no integrated travel measurement. Travel information available only through
the external ESMH001 digital travel display, requiring an additional serial port on the PC.
For an integrated solution with full PC control, including travel distance, see test stand
model ESM301.
|
