|
|
Mark-10 BG2 Force Gauge, 2 x 0.001 lb |
|
| ±0.2% accuracy. RS-232, Mitutoyo and analog outputs with automatic timed output on RS-232. Dual setpoints with outputs, programmable analog and digital filters. Reversible aluminum housing for hand held use or stand mounting. Full computer control more ... |
|
Test Equipment >
Force Gauges >
Digital Force Gauges
|
|
Have Questions?
Our Staff will be glad to help |
|
|
|
|
|
|
|
|
|
Features
The Mark 10 BG Digital Force Gauge is an advanced force measurement solution with sophisticated measurement capabilities, data outputs, computer control capabilities, and a long list of features and configurable settings. The BG can stop motorized test stand travel at user-selectable set points, and can also prevent force overload (when used with the ESM motorized test stand). Go / no go testing can also be accomplished with an optional plug-in hi / lo limits indicator.
Features:
- Compatible with all Mark 10 test stands and grips
- RS-232, Mitutoyo and analog outputs
- GCL-Gauge Control Language for full computer control
- Automatic timed output on RS-232
- Dual set points with outputs
- Averaging mode for average readings over time
- External trigger for contact or switch testing and data capture
- General purpose I/O for external device control
- Programmable analog and digital filters
- Selectable units of measurement
- Programmable default configuration
- Peak memory for tensile and compressive forces
- Push-button calibration
- Battery or AC operation
- Programmable automatic shutoff
- Reversible aluminum housing for handheld use or test stand mounting (see below)
- Same housing size for all capacities
Specifications
- Accuracy: ± 0.2% of full scale ±1 digit
- Sampling rate: 65 readings/sec
- Display rate: 25-10/sec, 65/sec in peak mode
- Display: 4-1/2 digit, 0.3 inch (7.6 mm) high LCD
- Indicators for low battery , units and mode of operation
- Power: AC or rechargeable battery with IPM, a 3-step Intelligent Power Management system that warns the user via LO BAT indicator and then will shut off the gauge
- RS-232 - Fully configurable up to 9600 baud. Includes GCL (Gauge Control Language)
- Mitutoyo output - Serial BCD suitable for all Mitutoyo SPC-compatible devices
- Analog output - +/-VDC +/-0.25% of full scale at capacity. Positive for compression, negative for tension
- Set point outuputs: 3 open collector lines (utilizing Mitutoyo lines)
- General purpose I/O: 3 open collector outputs and one input (utilizing Mitutoyo lines)
- Sensor detection: 0.010 (0.25 mm) maximum deflection at full load
- Safe overload: 150% of capacity - display shows == at 110% and above
- Battery life: 8-10 hours per charge
- Weight - Gauge only: 0.9 lbs (0.4 kg)
- Environmental requirements: 40°F - 100°F [5°C - 45°C], <96% humidity (non-condensating)
- Warranty: 3 years
The Mark 10 BG digital force gauge is compatible with all Mark-10 force measurement test stands. It is shown here in a tensile testing application, mounted to an ESM motorized test stand with optional items: digital travel display, limit switches, and wedge grips. Mark-10 BG force gauges are supplied in a cushioned carrying case with AC adapter, rechargeable battery, chisel, cone, v-groove, hook, flat, extension rod, users manual, and NIST-traceable certificate of calibration
Reversible Housing - A Mark-10 Exclusive
All Mark-10 force gauges have reversible housings that allow the user to use the gauge with the load cell shaft pointing up or down, without the inconvenience of upside-down buttons and display. The housing for Mark-10 BG and Series EG gauges is reversible by separating the two halves and reassembling them with just one connector - an extra bit of engineering that will make your testing setups quicker and more efficient.
| Model |
Capacity x resolution |
Price |
| BG012 |
0.12 x 0.00005 lb, 50 x 0.02 gF, 0.5 x 0.0002 N, 110V |
$1087 |
| BG025 |
0.25 x 0.0001 lb, 100 x 0.05 gF, 1 x 0.0005 N, 110V |
$1087 |
| BG05 |
0.5 x 0.0002 lb, 250 x 0.1 gF, 2.5 x 0.001 N, 110V |
$1087 |
| BG2 |
2 x 0.001 lb, 1 x 0.0005 kgF, 10 x 0.005 N, 110V |
$945 |
| BG5 |
5 x 0.002 lb, 2.5 x 0.001 kgF, 25 x 0.01 N, 110V |
$945 |
| BG10 |
10 x 0.005 lb, 5 x 0.002 kgF, 50 x 0.02 N, 110V |
$945 |
| BG20 |
20 x 0.01 lb, 10 x 0.005 kgF, 100 x 0.05 N, 110V |
$945 |
| BG50 |
50 x 0.02 lb, 25 x 0.01 kgF, 250 x 0.1 N, 110V |
$945 |
| BG100 |
100 x 0.05 lb, 50 x 0.02 kgF, 500 x 0.2 N, 110V |
$945 |
| BG200 |
200 x 0.1 lb, 100 x 0.05 kgF, 1000 x 0.5 N, 110V |
$1087 |
| BG500 |
500 x 0.2 lb, 250 x 0.1 kgF, 2500 x 1 N, 110V |
$1087 |
| Optional Equipment |
| 09-1047 |
Cable, BG/CG/EG/BGI to Mitutoyo SPC |
$71 |
| 09-1048 |
Cable, BG/CG/EG/BGI to RS-232, 25-pin |
$71 |
| 09-1048A |
Cable, BG/CG/EG/BGI to RS-232, 9-pin |
$71 |
| 09-1090 |
Cable, set point, BG/BGI/CG to test stand |
$137 |
| 11-1022 |
Hi / Lo limits indicator for BG/BGI/CG |
$85 |
| 11-1042 |
Overload protection module, BG/CG/EG/BGI to test stand |
$185 |
Weight:
10.00 lb
|
|
|
| |
|
|
* within the 48 continental US States
|
|
Optional Accessories
more info
|
Inscale 46-5-S Stainless Steel Floor Scale, 4 x 6, 5000 x 1 lb
This heavy duty type 304 Inscale Stainless Steel Floor Scale withstands the widest variety of hostile chemical and washdown environments. Stainless steel hardware and a stainless steel junction box are standard. NTEP approved Legal for Trade
- Comes with a NEMA 4X stainless steel indicator
- 15 foot cable included
- Factory pre-calibrated
- Installs in 15 minutes or less - simply plug in and weigh!
- 3 year warranty
Included Inscale TI-600 indicator:
- NEMA 4x stainless steel enclosure.
- NTEP approved for 5000 divisions.
- Keyboard tare entry.
- Full duplex RS-232 serial port.
- Gross, net, tare, print, ticket mode.
- Full font panel configuration.
- Stainless steel swivel stand
| Model Number |
Capacity
x Graduation
(lbs) |
Platform
Size
(ft) |
Shipping Weight
(lbs) |
Ramp Model Number |
| 22-5-S |
5000 x 1 |
2 x 2 |
80 |
22-10R-S |
| 22-10-S |
10000 x 2 |
2 x 2 |
80 |
22-10R-S |
| 33-5-S |
5000 x 1 |
3 x 3 |
200 |
33-10R-S |
| 33-10-S |
10000 x 2 |
3 x 3 |
200 |
33-10R-S |
| 44-5-S |
5000 x 1 |
4 x 4 |
295 |
43-10R-S |
| 44-10-S |
10000 x 2 |
4 x 4 |
295 |
43-10R-S |
| 45-5-S |
5000 x 1 |
4 x 5 |
380 |
44-10R-S |
| 45-10-S |
10000 x 2 |
4 x 5 |
380 |
44-10R-S |
| 46-5-S |
5000 x 1 |
4 x 6 |
430 |
44-10R-S |
| 46-10-S |
10000 x 2 |
4 x 6 |
430 |
44-10R-S |
| 55-5-S |
5000 x 1 |
5 x 5 |
455 |
53-10R-S |
| 55-10-S |
10000 x 2 |
5 x 5 |
455 |
53-10R-S |
| 57-5-S |
5000 x 1 |
5 x 7 |
690 |
54-10R-S |
| 57-10-S |
10000 x 2 |
5 x 7 |
690 |
54-10R-S |
|
|
more info
|
Mark-10 15-1004 MESURGauge Data Collection Software
We are pleased to introduce Mark-10 MESURgauge software, a measuring and analysis program designed to expand the functionality of Mark-10 force and torque measuring instruments.
- Ability to display both load and travel data
The ability of MESURgauge to display load and travel data sets it apart from other basic force measurement programs. If the customer wishes to plot a graph of load vs. travel, common for such applications as tensile testing and spring testing, MESURgauge is a compelling alternative to more expensive and complex material testing programs.
- Compatibility with competitors gauges
Any force or torque gauge with RS-232 data output is compatible with Mark-10 MESURgauge software. Simply enter in the appropriate communication protocols of the gauge into the program.
- Simulated data makes evaluation a breeze
Built-in simulated data allows the customer to evaluate the program with data which can be graphed, analyzed, and manipulated just like real test data. A gauge and cable are not necessary.
Mark-10 MESURgauge is a measuring and analysis program designed to expand the functionality of force and torque measuring instruments. Mark-10 MESURgauge Software captures readings from any force or torque gauge with RS-232 output and displays data in tabular and graphical formats. Load data can be graphed versus time or distance, particularly useful for such applications as spring testing and tensile testing.
Mark-10 MESURgauge Software includes a set of tools to analyze test results, including statistical calculations, quick data export to Microsoft Excel, customizable reports, pass/fail indicators, and many others. Test setups and sequences are customizable and can be saved and recalled. The user can program test start and stop conditions, including load, time, distance, and sample break.
Additional features in Mark-10 MESURgauge Software include a large display screen for real time load and travel data and a utility to configure Mark-10 gauges from a PC. Built-in simulated data generation allows Mark-10 MESURgauge Software to be evaluated without a gauge.
Additional Features:
- Inputs data from a force or torque gauge and travel display to a PC for further analysis
- Real time tabular and graphical data displaying load vs. time or load vs. distance
- Configurable start and stop test triggers (time, load, number of samples, or distance)
- Statistical calculations (minimum, maximum, average, area under curve)
- Graph manipulation tools, including zooming, scaling, panning, titles, and more
- One-button export to Excel
- Create customizable reports and report templates
- Compatible with all Mark-10 and other force and torque measuring instruments
- Save and recall test setups and test data
- Configure Mark-10 instruments easily through a simple interface
- View real time data on a large simulated instrument display
Computer Requirements
- Windows 2000 or later operating system
- At least 150 MB of free hard disk space
- Minimum display resolution of 1024 x 768
|
|
more info
|
Mark-10 G1027 V-Groove, 200 lb
For compression testing of round or odd shaped samples. Use them with a force gauge and a test stand to create a complete testing system.
| Model |
Capacity
(lb / N) |
Weight
(lb / kg) |
A |
B |
C |
D |
| G1027 |
200 / 1000 |
0.004 / 0.001 |
0.5 / 12.7 |
0.25 / 6.4 |
#10-32F |
0.08 / 2.0 |
| G1034 |
500 / 2500 |
0.04 / 0.018 |
1.0 / 25.4 |
0.5 / 12.7 |
5/16-18F |
0.25 / 6.4 |
|
|
more info
|
Mark-10 G1026 Cone Point, 200 lb
For puncturing a variety of samples. Use them with a force gauge and a test stand to create a complete testing system.
| Model |
Capacity
(lb / N) |
Weight
(lb / kg) |
A |
B |
C |
| G1026 |
200 / 1000 |
0.003 / 0.001 |
0.5 / 12.7 |
0.5 / 12.7 |
#10-32F |
| G1033 |
500 / 2500 |
0.03 / 0.014 |
1.0 / 25.4 |
0.5 / 12.7 |
5/16-18F |
|
|
more info
|
Mark-10 G1025 Chisel Point, 200 lb
For compressing or puncturing a variety of samples. Use them with a force gauge and a test stand to create a complete testing system.
| Model |
Capacity
(lb / N) |
Weight
(lb / kg) |
A |
B |
C |
| G1025 |
200 / 1000 |
0.003 / 0.001 |
0.5 / 12.7 |
0.5 / 12.7 |
#10-32F |
| G1032 |
500 / 2500 |
0.04 / 0.018 |
1.0 / 25.4 |
0.5 / 12.7 |
5/16-18F |
|
|
more info
|
Mark-10 G1024-2 Extension Rod, 200 lb, 1 in
For use between a force gauge and another attachment or grip. Use them with a Mark-10 force gauge and test stand to create a complete compression testing system.
| Model |
Capacity
(lb / N) |
Weight
(lb / kg) |
A |
|
C |
D |
| G1024 |
200 / 1000 |
0.01 / 0.005 |
5.0 / 127.0 |
0.25 / 6.4 |
#10-32F |
#10-32G |
| G1024-1 |
0.02 / 0.009 |
2.0 / 50.8 |
| G1024-2 |
0.05 / 0.023 |
1.0 / 25.4 |
| G1031 |
500 / 2500 |
0.05 / 0.023 |
5.0 / 127.0 |
0.5 / 12.7 |
5/16-18F |
5/16-18F |
| G1031-1 |
0.1 / 0.045 |
2.0 / 50.8 |
| G1031-2 |
0.25 / 0.113 |
1.0 / 25.4 |
|
|
more info
|
Mark-10 G1024-1 Extension Rod, 200 lb, 2 in
For use between a force gauge and another attachment or grip. Use them with a Mark-10 force gauge and test stand to create a complete compression testing system.
| Model |
Capacity
(lb / N) |
Weight
(lb / kg) |
A |
|
C |
D |
| G1024 |
200 / 1000 |
0.01 / 0.005 |
5.0 / 127.0 |
0.25 / 6.4 |
#10-32F |
#10-32G |
| G1024-1 |
0.02 / 0.009 |
2.0 / 50.8 |
| G1024-2 |
0.05 / 0.023 |
1.0 / 25.4 |
| G1031 |
500 / 2500 |
0.05 / 0.023 |
5.0 / 127.0 |
0.5 / 12.7 |
5/16-18F |
5/16-18F |
| G1031-1 |
0.1 / 0.045 |
2.0 / 50.8 |
| G1031-2 |
0.25 / 0.113 |
1.0 / 25.4 |
|
|
more info
|
Mark-10 G1024 Extension Rod, 200 lb, 5 in
For use between a force gauge and another attachment or grip. Use them with a Mark-10 force gauge and test stand to create a complete compression testing system.
| Model |
Capacity
(lb / N) |
Weight
(lb / kg) |
A |
|
C |
D |
| G1024 |
200 / 1000 |
0.01 / 0.005 |
5.0 / 127.0 |
0.25 / 6.4 |
#10-32F |
#10-32G |
| G1024-1 |
0.02 / 0.009 |
2.0 / 50.8 |
| G1024-2 |
0.05 / 0.023 |
1.0 / 25.4 |
| G1031 |
500 / 2500 |
0.05 / 0.023 |
5.0 / 127.0 |
0.5 / 12.7 |
5/16-18F |
5/16-18F |
| G1031-1 |
0.1 / 0.045 |
2.0 / 50.8 |
| G1031-2 |
0.25 / 0.113 |
1.0 / 25.4 |
|
|
more info
|
Mark-10 G1029 Flat Head, 200 lb
These attachments are ideal for compression testing of buttons, membrane switches, etc. Use them with a force gauge and a test stand to create a complete testing system.
| Model |
Capacity (lb / N) |
Weight (lb / kg) |
A |
B |
C |
|
G1029 |
200 / 1000 |
0.01 / 0.005 |
0.5 / 12.7 |
0.5 / 12.7 |
#10-32F |
|
G1036 |
500 / 2500N |
0.06 / 0.027 |
0.75 / 19.1 |
0.87 / 22.1 |
5/16-18F |
|
|
more info
|
Mark-10 G1028 Hook, 20 lb
These hooks are ideal for a variety of tensile tests. Use them with a force gauge and a test stand to create a complete testing system.
| Model |
Capacity (lb / N) |
Weight (lb / kg) |
RA |
|
|
D |
| G1028 |
20 / 100 |
0.01 / 0.005 |
0.05 / 1.3 |
1.0 / 25.4 |
0.1 / 2.5 |
#10-32F |
| G1038 |
200 / 1000 |
0.02 / 0.009 |
0.2 / 5.1 |
1.5 / 38.1 |
0.19 / 4.8 |
#10-32M |
| G1035 |
500 / 2500 |
0.5 / 0.023 |
0.3 / 7.6 |
1.9 / 48.3 |
0.28 / 7.1 |
5/16-18M |
| G1042 |
1000 / 4500 |
0.32 / 0.145 |
0.5 / 12.7 |
4.1 / 104.1 |
0.45 / 11.4 |
1/2-20M |
|
|
more info
|
Mark-10 09-1048A RS-232, 9-pin Cable
Cable, BG/CG/EG/BGI to RS-232, 9-pin
|
|
more info
|
Mark-10 09-1047 Mitutoyo Cable
Cable, BG/CG/EG/BGI to Mitutoyo SPC
|
|
more info
|
Mark 10 RSU100 Communication adapter, RS-232 to USB
The RSU100 is a communication adapter used to convert RS-232 data
from a Mark-10 device to USB format for PC use.:
:
:
INCLUDED ITEMS:
1 RSU100 Communication Adapter:
1 USB cable, 6’:
1 Installation CD:
1 User’s guide :
:
:
User’s guide :
:
|
|
|
|
|
|
|
|
|
