|
|
Mark-10 ESM-DC Advanced Motorized Test Stand |
|
| The ESM-DC is an advanced motorized test stand offering all the mechanical specifications of the ESM. The stand has a capacity of 200 lbF and is configurable in many positions to accommodate a wide variety of sample shapes and sizes. A manual fine adjustment knob allows for fine positioning of the crosshead position, and a stepper motor prevents speed variation with load, making testing more precise and repeatable. more ... |
|
Test Equipment >
Force Test Stands >
Motorized Test Stands
|
|
|
|
|
|
Features
The ESM-DC is an advanced motorized test stand offering all the mechanical specifications of the ESM. The stand has a capacity of 200 lbF and is configurable in many positions to accommodate a wide variety of sample shapes and sizes. A manual fine adjustment knob allows for fine positioning of the crosshead position, and a stepper motor prevents speed variation with load, making testing more precise and repeatable.
The ESM-DC's controller adds a significant amount of sophistication, including an extended speed range, PC control capability, programmable cycling, auto return, overload protection, and other features.
Features/ Specifications
Maximum force: 200 lb [1kN]
Maximum travel: 13'[330 mm]
Speed range: 0.02-36 in/min 0.5 - 900 mm/min]
Speed accuracy: ±0.2% of setting, ±0% variation with load
Remote controller
Manual travel knob
Mounting holes for bench mounting
Removable base plate with 25 #10-32 threaded holes for fixture mounting
Base may be removed for alternative mounting
Universal power supply: 80-250 VAC
CE mark
Optional Hardware
Digital travel display
6" [150 mm] travel, 0.0005" [0.01 mm] resolution, 0.001" [0.03 mm] accuracy, SPC output for automated data collection. For output of travel data to a PC, the following items are required:09-1066 cable and MRS100A communication adapter.
Limit Switch Kit
Set of upper and lower adjustable solid state limit switches. Repeatable to within 0.001" [0.03 mm].
Column Extensions
Available in 6 in (150 mm), 12 in (300 mm), 24 in (600 mm), and custom lengths
Multi-function cable, BG gauge to controller
Connects a Series BG force gauge to the controller. This single cable is used to transmit set points, overload signals, and force data.
Serial Cable, Controller to PC
Bi-directional communication with a PC for computer control. Also sends force data from the controller to a PC.
Serial cable, gauge to PC
Connects a Series BG force gauge with a PC. Bypasses the controller.
Controller Features
Computer Control
An RS-232 port is provided to interface with a PC. THe ESM-DC accepts a number of commands pertaining to test stand motion and force gauge functions*. The followign additional items are required for PC control:
- Series BG force gauge
- 09-1056 serial cable (seee Optional Equipment)
- 09-1143 multi-function cable (see Optional Equipment)
Overload Protection
Protects a force gauge against overload (requires a Series BG force gauge and 09-1143 multi-function cable). The user programs the desired percentage fo full scale of the gauge. Adjustable analog output voltage setting allows the test stand to interface with virutually any force gauge with analog output.
Auto-return
The crosshead moves to a limit switch or force set point (requires a Series BG force gauge), stops, and reverses direction at maximum speed to the other limit switch or set point.
Cycling / Dwell Time
The crosshead moves up and down between limit switches or force set points (requires a Series BG force gauge). Configurable up to 99,999 cycles. Dwell time allows the operator to program the amount of time, up to 9,999.9 seconds, in 0.1 second intervals, for which the crosshead pauses at limits.
Programmable UP / DOWN Button Functions
UP and DOWN button operation can be configured in three user-configurable modes: Maintained: a short push produces continuous motion until STOP is pressed, Momentary: crosshead moves only while the button is pressed, and Auto: short push produces maintained motion, while holding down the button will produce momentary motion.
Independent Up and Down Speeds
Programmable independent speeds for up and down directions
Selectable speed units of measurement (in/min & mm/min)
Password protection
Prevents unauthorized changes to test parameters
* Contains no integrated travel measurement. Travel information available only through the external ESM001 digital travel display, requiring an additional serial port on the PC. For an integrated solution with full PC control, including travel distance, see test stand model ESM301.
OPTIONAL EQUIPMENT
A wide range of force gauges and gripping fixtures
Digital travel display >>
6" [150 mm] travel, 0.0005" [0.01 mm] resolution, 0.001" [0.03 mm] accuracy, SPC output for automated data collection. For output of travel data to a PC, the following items are required: 09-1066 cable and MRS100A communication adapter.
Limit switch kit <<
Set of upper and lower adjustable solid state limit switches. Repeatable to within 0.001" [0.03 mm].
Column extensions >>
Available in 6", 12", 24", and custom lengths
Multi-function cable, BG gauge to controller
Connects a Series BG force gauge to the controller. This single cable is used to transmit set points, overload signals, and force data.
Serial cable, controller to PC
Bi-directional communication with a PC for computer control. Also sends force data from the controller to a PC.
RS-232 to USB adapter
Converts RS-232 to USB output. Includes USB cable and installation CD.
Serial cable, gauge to PC
Connects a Series BG force gauge with a PC. Bypasses the controller.
Competitor force gauge mounting kits available
|
|
|
| |
|
* within the 48 continental US States
|
|
Optional Accessories
more info
|
Mark-10 ESM001 Digital Travel Display for ESM - 6 inches / 150mm
6” [150 mm] travel, 0.0005” [0.01 mm] resolution, 0.001” [0.03 mm] accuracy, SPC output for
automated data collection. For output of travel data to a PC, the following items are required: 09-1066
cable and MRS100A communication adapter.
|
|
more info
|
Mark-10 ESM003-1 Column Extension, 6 in
6 inch column extension for ESM / ES30
|
|
more info
|
Mark-10 ESM003-2 Column Extension, 12 in
12 inch column extension for ESM / ES30
|
|
more info
|
Mark-10 ESM003-3 Column Extension, 24 in
24 inch column extension for ESM / ES30 - 24 in (600 mm),
|
|
more info
|
Mark 10 09-1143 Multi-function cable,, gauge to controller
Connects a Series BG force gauge to the controller. This single cable is used to transmit set points,
overload signals, and force data
|
|
more info
|
Mark 10 09-1056 Serial cable, controller to PC
Serial cable, controller to PC
Sends force and travel data on a single cable via RS-232 to a PC.
Bi-directional communication with a PC for computer control. Also sends force data from the controller
to a PC.
|
|
more info
|
Mark-10 09-1066 Travel Display to Mitutoyo SPC Communication Cable
Communication cable, travel display to Mitutoyo SPC
|
|
|
|
|
|
|
|
|
