Imada Horizontal Motorized Force Test Stand

ML-275

MH-275

Imada MH-500 motorized test stand - horizontal test stand

MH-500BA/AC

Imada ML-275 Horizontal Motorized Force Test Stand

Force Testing >> Imada Force Testing

Imada ML-275 motorized test stand - horizontal test stand

ML-275 motorized test stands offer basic force testing. Combination of screw system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range. Speed control, quick return and emergency stop are standard features. The ML-275 accepts any of the standard range Imada force gauges. AP-002 Adapter Plate is available to mount most other force gauges to IMADA test stands.

Combination of screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range.
One stand for both compression (push) and tension (pull) tests
Wide speed range: 0.3 � 7 in/min (optional speed ranges available)
Stroke 11.8"
No programming required
Optional digital distance meter and Speed Configurations

Imada MH-275 Horizontal Motorized Force Test Stand

Imada MH-275 motorized test stand - horizontal test stand

MH-275 motorized test stands offer advanced force testing. The combination of screw drive system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range.

Connect the MH-275 test stand with an Imada Series force gauge and enable force controlled testing and Conditional Overload Prevention.

High/Low Set Point Force Control Force control is activated when the applied force is at or between the high and low set point(s) of the Z Series force gauge and is deactivated by the digital timer. Initial carriage speed is controlled by the variable or fixed speed settings.

One Way Force Control Initial carriage speed is controlled by the variable or fixed speed settings. When the applied force reaches the low set point of the Z Series force gauge, the test stand�s carriage speed is adjusted to 20% of maximum and decreases to zero as the applied force reaches the high set point. Ideal for non-destructive testing.

Speed control, quick return and emergency stop are standard features. The MH-275 accepts any of the standard range Imada force gauges. Optional timer and digital distance meter available. AP-002 Adapter Plate is available to mount most other force gauges to IMADA test stands.

Combination of screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range.

Jog, Single Cycle, Continuous Cycle (72 hour max.), Force Control Force Control operation with Imada Z Series force gauges

Wide speed range: 0.3 � 7 in/min (optional speed ranges available)

Stroke 11.8" Optional timer and digital distance meter

Conditional Overload Prevention

Imada MH-500 Horizontal Motorized Force Test Stand

Imada MH-500 motorized test stand - horizontal test stand

MH-500BA (Basic Type)
MH-500AC (Auto Cycle Type)

Imada motorized test stands offer consistent and reliable testing. Our Basic or Auto Cycle models are available in Standard, High, and Low speeds. Speed control, quick return and emergency stop are standard features. They accept any of the standard range Imada force gauges and special attachments. Optional digital distance meter is also available.

Basic Models

Basic Models have top and bottom travel limits that can be adjusted for a precise range of movement. Set the travel limits, flip the direction switch up to move the cross head up to the top travel limit at the selected speed. Flip the direction switch down to send the cross head down to the bottom travel limit. The speed is set by a Speed Adjust knob. Quick Return and Emergency Stop features are also included.

Stroke: 12"
Top and bottom travel limits that can be adjusted for a precise range of movement.
Able to set the travel limits
Quick Return and Emergency Stop
Speed is set by a Speed Adjust knob
Able to flip the direction switch up to move the cross head up to the top travel limit at the selected speed.

Auto cycle Models

Auto cycle models have top and bottom travel limits that can be adjusted for a precise range of movement. Speed Adjust, Quick Return and Emergency Stop features are also included. These stands have three function modes.

Manual Mode: While the Direction switch is held up, the head moves up. Holding the switch down moves the cross head down. When the switch is released the head stops. This mode is ideal for positioning.

Single Cycle Mode: When the Direction switch is pushed up, the cross head moves up at the desired speed, and when it reaches the top travel limit, it automatically goes back and stops at the bottom travel limit, completing one cycle. Pushing the switch down runs the cycle in reverse.

Auto Cycle Mode: This mode is similar to Single Cycle mode, except that the cross head travels up and down repeating the cycle until either the Power or Emergency switches is turned off. This mode is ideal for applications such as fatigue testing.

Stroke: 12"
Offer Manual Mode, Single Cycle Mode, and Auto Cycle Mode.
Able to set the travel limits
Quick Return and Emergency Stop
Speed is set by a Speed Adjust knob

About Us | Returns | Products | Weight Conversion Calculator | Shipping Charge Estimator