| Chatillon Ametek |
|
Chatillon Ametek SLC Remote Force Measurement Sensors
FREE Ground Shipping *
From: $1,291.05
The CHATILLON® SLC Series loadcells are full-bridge strain gauge sensors complete with 15-pin plug. These loadcells are used with the Chatillon DFS-R-ND Series digital indicator. They may also be used with the Chatillon TCD Series digital force testers (recalibration with a TCD Series Console is required) more ...
|
|
|
|
|
Chatillon Ametek Compression Plates
From: $13.50
Round compression plates used for general compression testing. Available in aluminium for the testing of soft samples such as cardboard, plastics, rubber, foams, lightweight springs, bottles and cartons. Available in hardened steel for the testing of rubber, plastics, heavy duty springs, building products, composites, and ceramics. more ...
|
|
|
|
Chatillon Ametek Chuck Grips
FREE Ground Shipping *
From: $437.58
Stainless steel Jacobs chuck grips hold small cylindrical samples up to 1/4 inch (6 mm). Has 10-32 thread mounting. Capacity: 20 lb; Weight: 4 oz. Ideal for holding small cylindrical samples during tension or compression testing more ...
|
|
|
|
| Mark 10 |
|
|
|
|
|
|
|
|
|
|
|
|
Mark-10 G1097 Upper Anvil for Bend Fixtures for ASTM C393, C1161, D790
FREE Ground Shipping *
$171.00
This family of bend fixtures is designed for 3-point and 4-point bend testing of plastics, metals, ceramics, tubing, and many other materials. Two base sizes are available, along with an upper anvil, and optional roller diameters. Use a base-anvil combination for 3-point bend testing or two bases for 4-point bend testing. The fixtures conform to ASTM C393, C1161, D790, and related standards.> more ... |
|
|
Mark-10 G1099 Puncture Fixture
FREE Ground Shipping *
$175.75
The G1099 Puncture Fixture is designed for puncturing gypsum board and other materials to determine puncture resistance. Compatible with all current Mark-10 force gauges. For added safety, the spring-loaded needle retracts when not actively pushed into a material.> more ... |
|
|
Mark-10 G1095 Bend Fixture for ASTM C393, C1161, D790
FREE Ground Shipping *
$902.50
This family of bend fixtures is designed for 3-point and 4-point bend testing of plastics, metals, ceramics, tubing, and many other materials. Two base sizes are available, along with an upper anvil, and optional roller diameters. Use a base-anvil combination for 3-point bend testing or two bases for 4-point bend testing. The fixtures conform to ASTM C393, C1161, D790, and related standards.> more ... |
|
|
Mark-10 G1123 Compression Plate, Self Leveling - 2000 lb 3.07 in dia
FREE Ground Shipping *
$959.50
This self-aligning compression plate adjusts to the angle of the sample via four adjustable screws and nuts. Ideal for ensuring parallelism and complete sample engagement, particularly for low-deflection springs and other materials with high spring rates. Integrated eye end mount. Eye end adapters are available to adapt to Mark-10 load cells, force gauges, and test stands.> more ... |
|
|
Mark-10 G1089 ISO 7886-1 Syringe Compression Fixture
FREE Ground Shipping *
$1,078.25
This fixture is designed to test compression force of a syringe plunger, as per ISO 7886-1 and other relevant standards. Four blank stainless steel inserts are included, and may be drilled in the field to accommodate various diameter barrels.> more ... |
|
|
Mark-10 G1096 High Capacity Bend Fixture for ASTM C393, C1161, D790
FREE Ground Shipping *
$1,235.00
This family of bend fixtures is designed for 3-point and 4-point bend testing of plastics, metals, ceramics, tubing, and many other materials. Two base sizes are available, along with an upper anvil, and optional roller diameters. Use a base-anvil combination for 3-point bend testing or two bases for 4-point bend testing. The fixtures conform to ASTM C393, C1161, D790, and related standards.> more ... |
|
|
Mark-10 G1110 Puncture Fixture for ASTM D5748 - 1,000 lbF
$2,769.25
The G1110 is designed for determining the puncture resistance of plastic films and other materials up to 1,000 lbF (5 kN), in conformance with ASTM D5748. The fixture's generous height accommodates materials with long elongation. Four toggle clamps and a compression ring with concentric ridges effectively secure the material, while the included plunger with ball probe stretches and ruptures the sample> more ... |
|
| Shimpo |
|
Shimpo M6 Grips For use with 2 - 200 lb force gauges
From: $76.50
The FG-M6PUNCTURE-ST adapter operation is quite simple. The outer shell of the FG-M6PUNCTURE-ST retracts as a load is applied to the test material. As the retraction of the outer shell occurs, the pin becomes exposed. The puncture test continues until the outer shell comes to a stop from contact with the base of the force gauge. more ...
|
|
|
|
|
