 |
 |
Mark 10 Force Gauges - Compare the Models
| Compare BG, CG, EG, MG Modles | Compare 4, 5 Series |
| Model | Series 4 | Series 5 |
|---|---|---|
 |
 |
|
| Peak sampling rate: | 3,000 Hz | 7,000 Hz |
| Pulse capture: | 1/1,500 sec. minimum | 1/3,500 sec. minimum |
| Accuracy (% FS): | +0.2 +1 LSD | +0.1 +1 LSD |
| Data outputs: | USB, RS-232, Mitutoyo, Analog | USB, RS-232, Mitutoyo, Analog |
| Automatic output via USB/RS-232: | No | Yes |
| Data memory: | 50 readings, with output | 1,000 readings, with output |
| Data memory deletion: | Any individual data point, or clear all | Any individual data point, or clear all |
| Statistics calculations: | Yes | Yes |
| Statistics output to PC: | Yes | Yes |
| Averaging mode: | No | Yes |
| External trigger mode: | No | Yes |
| Analog load bar graph: | Yes | Yes |
| Set point markers on bar graph: | Yes | Yes |
| GCL2 (Gauge Control Language 2) ASCII command set: |
�?� only | Full command set |
| Compatibility with ESM301 test stand and Series DC controllers: |
Set points, overload protection, and communication with the �?� character only | Full compatibility, including PC control |
| Display: | Graphics LCD | Graphics LCD |
| Display backlight: | Yes | Yes |
| Programmable backlight auto-off and initial status: | No | Yes |
| On-screen pass/fail indicators: | Yes | Yes |
| Password protection of keys: | No | Yes, for calibration and individual keys |
| Peak readings always displayed: | Yes | Yes |
| Set points always displayed: | Yes | Yes |
| Reversible housing: | Yes | Yes |
| No. of units of measurement: | 5 | 5 |
| Capacity Range / No. of Capacities: | 0.12 lb � 500 lb / 11 | 0.12 lb � 500 lb / 11 |
| Configurable calibration (weight increments and no. of data points): |
Yes | Yes |
| Overload outputs: | Dedicated pins for tension and compression | Dedicated pins for tension and compression |
| Set point outputs: | Dedicated pins for high and low set points | Dedicated pins for high and low set points |
| MESURTM Lite software included: | Yes | Yes |
| Dimensions (inches): | 2.5 x 5.9 x 1.3 | 2.5 x 5.9 x 1.3 |
| Warranty: | 3 years | 3 years |
| Manufactured in: | United States | United States |
| List Price: | $795 - $945 | $995 - $1,145 |
| Series 4 More info | Series 5 More info |
| Model | ||||
|---|---|---|---|---|
| Accuracy (% of full scale) | ±0.2% |
±0.3% |
±0.5% |
|
| Sampling Rate (readings/second) | 65 |
30 |
||
| Display Rate (updates/second) | 2.5 / 65 in peak mode |
2.5 / 30 in peak mode |
||
| Power | AC or rechargeable battery (both included). Includes Intelligent Power Management System (IPM). IPM warns the user via a "LO BAT" indicator and then will power off the gauge |
AC or non-rechargeable battery, includes IPM |
||
| Battery Life | 8-10 hours of continuous use |
30 hours of continuous use |
||
| Peak Capture | Yes, in tension and compression (cw and ccw for torque gauges) |
|||
| Units of measurement | Force gauges: lb(oz), kg(g), N Torque gauges: lbin(ozin), kgmm, Ncm for torque gauges |
|||
| Outputs | Standard |
Optional |
n/a |
|
| RS-232 | Fully configurable up to 9600 baud. Includes Gauge Control Language (GCL). |
Fully configurable up to 9600 baud |
n/a |
|
| Mitutoyo (Digimatic) | Serial BCD suitable for all Mitutoyo SPC-compatible devices |
n/a |
||
| Analog | ±1 VCD, ±0.25% of full scale at capacity. Positive for compression, negative for tension. |
n/a |
||
| General Purpose I/O | Three open collector outputs and one input (utilizing Mitutoyo lines) |
n/a |
||
| Set Point | Three open collector lines (utilizing Mitutoyo lines) |
n/a |
||
| Configurable Settings | Analog filters, digital filters, outputs selection, automatic output (RS-232), automatic shutoff, initial (default), averaging mode, calibration |
Outputs selection, automatic shutoff, initial (default), calibration |
n/a |
|
| Load cell deflection | 0.010 in [0.25 mm] at full capacity |
|||
| Safe Overload | 150% (display shows "----" at 110% and above) |
|||
| Weight (gauge only) | BG012 - BG200: 0.95 lb [0.4 kg] BG500: 1.12 lb [0.5 kg] |
All capacities: 1.8 lb [0.8 kg] |
EG012 - EG200: 0.95 lb [0.4 kg] EG500: 1.12 lb [0.5 kg] |
MG025 - MG200: 0.7 lb [0.3 kg] MG500: 0.87 lb [0.4 kg] |
| Included Accessories | Chisel, cone, V-groove, hook, flat, extension rod |
Hook, flat |
||
| Environmental Requirements | 40°F - 100°F [5°C - 45°C], <96% humidity (non-condensating) |
|||
| Thermal Effects | Zero: 0.03% of full scale/°C, Span: 0.01% of full scale/°C |
|||
| Housing Construction | 6061 aluminum, reversible halves for handheld operation or test stand mounting |
|||
