|
Integral
Load Cell Gauge in six capacities from 2 to 500 lbs. - The DFIS offers
the same accuracy and digital data communications capabilities as the
full-featured DFGS series in an economical and
user-friendly digital force gauge product. The four basic keypad
functions provide for minimal operator training in production floor or
laboratory environments. The internal digital sampling rate of 1000
samples per second provides a high level of accuracy in all but the most
demanding force peak applications.
Operation Features:
- Internal digital sampling rate of 1000 samples per second
- Peak function automatically captures and stores highest instantaneous
reading within each test. The peak function may be engaged prior
to testing to freeze the display at the highest reading. It may
also be engaged after the test to display the peak value stored.
The "zero" key clears peak memory.
- Tension/compression modes are indicated by "T" for tension
or "C" for compression upon force application. In the digital
output, tension values are identified with a minus sign
- Selectable units of measurement: lb, kg or N
- Push button calibration
- Rechargeable battery or AC operation allows 8 hour continuous battery
operation with 12-14 hour charge. Low battery indicator on display.
Continuous AC operation via charger/AC adaptor
- Available for 110 VAC or 220 VAC
Output/Interface Features:
|
|
Shown on LTS
test stand |
- Bi-directional RS232 interface for data transmission as well as peripheral
control of all gauge keypad functions. Digital data transmission
up to 75 data points per second may be accomplished via the interface.
Data transmission parameters are user-selectable. (Baud rates
from 300 to 19,200). The DFIS may also be interfaced with a Chatillon
TCD-200 digital
test stand so that both gauge and stand may be peripherally controlled.
- Mitutoyo output (modified BCD) for use with Mitutoyo brand processors
- Analog Output: 0 to ±2.3 VDC full scale (approximate)
Physical Design Features:
- Die cast metal reversible housing. Split housing design permits upright
display whether gauge is hand held or test stand mounted.
- Easy to read 1/2" high LCD display with 4-1/2 digits for forced
value. Smaller characters within the display indicate units of measurement,
test mode and low battery
- 4 key membrane keypad with seperate on/off switch
- 2 separate rear mounting hole patterns: (2) #10-32 thd. holes for
light duty stands, or (4) 1/4-20 thd holes for heavy duty stands.
- Removable load cell shaft: 2 lb through 100 lb: #10-32 thd, 200 lb
& 500 lb: 5/16-18 thd
- Side holes for optional threaded handles
- Output connector: 12 pin "Hirose" design
Standard
Accessories:
Stainless steel attachments include a flat head, hook, cone, chisel and
extension rod. Gauge, battery charger, attachments, Allen wrench and operation
manual are furnished in a cushioned carrying case.
Specifications:
Model |
Capacity x Graduation |
Safe Overload* |
DFIS2 |
2 lb 0.002 lb |
5 lb |
| 1 kg x 0.001 kg |
| 10 N x 0.01 N |
DFIS10 |
10 lb x 0.01 lb |
20 lb |
| 5 kg x 0.005 kg |
| 50 N x 0.05 N |
DFIS50 |
50 lb x 0.05 lb |
75 lb |
| 25 kg x 0.02 kg |
| 250 N x 0.02 N |
DFIS100 |
100 lb x 0.1 lb |
150 lb |
| 50 kg x 0.05 kg |
| 500 N x 0.5 N |
DFIS200 |
200 lb x 0.2 lb |
300 lb |
| 100 kg x 0.1 kg |
| 1000 N x 1 N |
DFIS500 |
500 lb x 0.5 lb |
750 lb |
| 250 kg x 0.2 kg |
| 2500 N x 2 N |
13046 |
2 each, Aluminum Pull Handels |
LTCK-2 |
Mounting Kit for LTS, LTC and LTCM4
Test Stands |
HTCK-1 |
Mounting Kit for HTC and UTSM Test
Stands |
*maximum load with no mechanical damage (display blanks at 110% rated
capacity )
Accuracy: ±0.15% of full scale ±1 LSC (least significant
count)
Tare Capacity: 10% of full scale in pound mode
Full Scale Deflection: 0.010"
Temperature: 40° to 110°F (5°C to 45°C), Stability: 0.03% per °F
Weight: Instrument: 2 lbs (6 lb shipping weight)
Please click here for
recommended Test Stand configurations
Click here for Brochure
(Adobe PDF)
Top |
